Frequency/Voltage Control - Gigabyte GA-K8V Ultra-939 User Manual

Frequency/Voltage Control

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
K8 CPU Clock Ratio
Auto Detect PCI/DIMM Clk
CPU Clock
CPU Voltage Control
Normal CPU Vcore
AGP OverVoltage Control
DIMM OverVoltage Control
: Move Enter: Select
F5: Previous Values
Incorrect using these features may cause your system broken. For power End-User use only!
K8 CPU Clock Ratio
Default
x4 800Mhz ~ x20 4000Mhz Set K8 CPU Clock Ratio from x4 800Mhz to x20 4000Mhz.
Auto Detect PCI/DIMM CLK
Enabled
Disabled
CPU Clock
200MHz ~ 255MHz
CPU Voltage Control
Supports adjustable CPU Vcore from 0.800V to 1.700V by 0.025V step. (Default value: Normal)
Normal CPU Vcore
Display your CPU Vcore voltage.
AGP OverVoltage Control
Auto
+0.1V, +0.2V
DIMM OverVoltage Control
Auto
+0.1V, +0.2V
GA-K8VNXP-939/GA-K8V Ultra-939 Motherboard
Frequency/Voltage Control
[Default]
[Enabled]
[200MHz]
[Normal]
1.500V
[Auto]
[Auto]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Set K8 CPU Clock Ratio to CPU factory default. (Default value)
Enable PCI/DIMM clock auto-detection function. (Default value)
Disable this function.
Set CPU Host Clock from 200MHz to 255MHz.
Supply AGP voltage as AGP required. (Default value)
Increase AGP voltage range as user selected.
Supply DIMM voltage as memory module required. (Default value)
Increase DIMM voltage range as user selected.
- 50 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults