Gigabyte GA-K8V Ultra-939 User Manual page 65

4 Channel Analog Audio Output Mode
STEP 1 :
Connect the front channels to "Line Out", the rear
channels to "Line In".
Line Out Line In
STEP 2 :
Following installation of the audio driver, you'll find a
Sound Effect icon on the lower right hand taskbar.
Click the icon to select the function.
STEP 3 :
Click "Speaker Configuration" and select the "UAJ
Function". Then click on the left selection bar and
select "4CH Speaker" to complete 4 channel audio
configuration.
- 65 - Technical Reference