Subscribe to Our Youtube Channel
Related Manuals for Racing RAC610EHT
Summary of Contents for Racing RAC610EHT
- Page 1 ORIGINAL INSTRUCTIONS >EN ELECTRIC HEDGE TRIMMER RAC610EHT USER GUIDE CAUTION: Read this manual before using this machine!
-
Page 2: Table Of Contents
CONTENTS 1. SAFETY INSTRUCTIONS........................3 2. YOUR PRODUCT........................... 8 3. USE................................9 4. MAINTENANCE AND STORAGE..................... 10 5. DISPOSAL.............................11 6. DECLARATION OF CONFORMITY....................12 7. WARRANTY............................13 8. PRODUCT FAILURE........................... 14 9. WARRANTY EXCLUSIONS.......................15... -
Page 3: Safety Instructions
1. SAFETY INSTRUCTIONS WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 4 f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
- Page 5 turned off. A moment of inattention while operating the hedge trimmer may result in serious personal injury. When clearing jammed material or servicing the hedge trimmer, make sure all power switches are off and the power cord is disconnected. Unexpected actuation of the hedge trimmer while clearing jammed material or servicing may result in serious personal injury.
- Page 6 components must be repaired or replaced as soon as possible by authorized persons. Defective switches must be replaced by an authorized dealer. Do not use the machine if it cannot be turned off or turned on with a switch. When repairs are required, please contact your nearest dealer.
- Page 7 • Development of toxic dusts / fumes when used in confined spaces (vomiting / nausea) • Hearing loss in the absence of proper hearing protection WARNING! This machine generates an electromagnetic field during its operation. This field may under certain circumstances disrupt the functioning of active or passive medical implants. To reduce the risk of serious injury or death, people with medical implants should consult with their physician and the implant manufacturer before using this machine.
-
Page 8: Your Product
2. YOUR PROCUT a. Description Blade Rear handle+ switch Blade protection Protection Cable holder Pivoting handle Power plug b. Technical data Model RAC610EHT Tension 230-240V~, 50Hz Power 600W Non load speed 1700min Cutting length 610mm Cutting capacity 16mm Sound pressure level LpA = 91.59dB(A), K = 3dB(A) -
Page 9: Use
3. USE a. Installation of the protection If not installed, install the protection to the tool. Screw it with the 4 provided screws. b. Before cutting Make sure that the tool is properly assembled. Inspect the work area. Remove any materials or objects that may damage the tool or cause accidents. -
Page 10: Maintenance And Storage
Note: Starting the machine can also be done by holding the front handle and starting by pressing the switch on the rear handle. It depends on your work position. d. Pivoting handle You can change the position of the front handle according the work position you must have. Push and hold the handle button. -
Page 11: Maintenance
b. Maintenance There is no specific maintenance to be performed by the user. After each season, please bring the tool to an authorized service center to perform a general cleaning and the following operations: Lubrication of the blade Mechanical check of motor, spindle, bearings and housing. ... -
Page 12: Declaration Of Conformity
6. DECLARATION OF CONFORMITY BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux – France declare that the machine Designation: ELECTRIC HEDGE TRIMMER Model: RAC610EHT Serial number: 20241000691-20241001344 Is in conformity with the European Directives: Machine Directive 2006/42/EC EMC Directive 2014/30/EU... -
Page 13: Warranty
7 . WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. It can be extended by one year if the user subscribes to website of myswap. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. -
Page 14: Product Failure
8 . PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: • Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. •... -
Page 15: Warranty Exclusions
9 . WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •... - Page 16 BUILDER SAS 32 rue Aristide Bergès - Z.I. du Casque - 31270 Cugnaux - France MADE IN PRC...
Need help?
Do you have a question about the RAC610EHT and is the answer not in the manual?
Questions and answers