Related Manuals for Racing RAC52PB-B
Summary of Contents for Racing RAC52PB-B
- Page 1 ORIGINAL INSTRUCTIONS GASOLINE BRUSH CUTTER & GRASS TRIMMER RAC52PB-B INSTRUCTION MANUAL Read carefully this manual before any use. BUILDER 32, rue Aristide Bergès - ZI 31270 Cugnaux - France Made in China - 2020...
-
Page 2: Table Of Contents
ORIGINAL INSTRUCTIONS CONTENT 1. SAFETY WARNINGS.......................3 2. PRODUCT DESCRIPTION.......................8 3. ASSEMBLY..........................11 4. FILLING………………………………………………………………………………………………..13 5. OPERATION..........................14 6. MAINTENANCE & CARE......................16 7. TROUBLE SHOOTING......................18 8. DECLARATION OF CONFORMITY..................19 WARRANTY...........................20 10. PRODUCT FAILURE.......................21 11. WARRANTY EXCLUSIONS....................22... -
Page 3: Safety Warnings
ORIGINAL INSTRUCTIONS 1. SAFETY WARNINGS WARNING! When using this type of tool, basic precautions should always be followed to reduce the risk of fire and injury. Read all instructions carefully before attempting to use this product and retain these instructions. Be ... - Page 4 ORIGINAL INSTRUCTIONS Do not use the tool in the presence of flammable liquids or gases. Keep the work area clear. Before working, inspect the work area and remove any materials or objects that could cause accidents. Do not force the tool. ...
- Page 5 ORIGINAL INSTRUCTIONS For machines with a clutch, check regularly that the cutting attachment stops turning when the engine idles. Check the tool before and after use. Check for loose fasteners, fuel leaks and damaged parts, such as cracks in the cutting attachment. If the tool is damaged, if parts are missed or meet some dysfunctions, do not use the tool and bring it to a service agent for inspection and reparation.
- Page 6 ORIGINAL INSTRUCTIONS Residual risks Even if you use this product in accordance with all safety requirements, the potential risk of injury and damage remains. The following hazards may arise: There are harmful health consequences resulting from the emission of vibrations if the product is used for long periods of time or not managed adequately and properly maintained.
- Page 7 ORIGINAL INSTRUCTIONS BEWARE OF FOOT INJURY BY CUTTING ATTACHMENT PAY ATTENTION THAT BYSTANDERS ARE NOT INJURED THROUGH FOREIGN OBJECTS THROWN FROM THE MACHINE. BEWARE OF THROWN OBJECTS HIT BY CUTTING ATTACHMENTS. NEVER USE WITHOUT PROPERLY MOUNTED BLADE GUARD. BEWARE OF BLADE THRUST. KEEP BYSTANDERS AT LEAST 15 M AWAY.
-
Page 8: Product Description
ORIGINAL INSTRUCTIONS 2. PRODUCT DESCRIPTION... - Page 9 ORIGINAL INSTRUCTIONS a. Description 1. Starter handle 2. Starter 3. Throttle valve control lever 4. Plug cables 5. Fuel tank 6. Exhaust pipe 7. Left handle 8. Engine casing 9. Right handle 10. Lower part for attaching the handle 11. Shoulder strap ring 12.
- Page 10 (m/s2) Grass trimmer: 8.856 m/s², K=1.5 m/s (According to ISO 22867) Measured sound pressure level at operator’s Brush cutter: Idle:81.1 dB (A), Racing:99.4dB (A) Grass trimmer: Idle:93.0 dB (A), Racing:108.0 Racing: position K=3 dB (A) Guaranteed sound power level 112 dB (A) Line Max.
-
Page 11: Assembly
ORIGINAL INSTRUCTIONS 3. ASSEMBLY HANDLE INSTALLATION Remove the upper part of the handle attachment (1) by unscrewing the 4 screws. Install the operating handles (3 and 5). The right-hand grip (3) is equipped with engine controls, the trigger of the right-hand grip should be directed toward the gearbox. - Page 12 ORIGINAL INSTRUCTIONS To disassemble the blade, insert a metal locking tool in the hole on the side of the drive sprocket and on the drive. Loosen the retaining nut and then remove all elements. NOTE After installation, always check if the installation is correct. If blade is not well installed, it will vibrate excessively and can cause injury.
-
Page 13: Filling
ORIGINAL INSTRUCTIONS 4. FILLING 1) Filling fuel tank WARNING: When filling the tank: The tool must always be stopped and cooled. Never smoke during refueling. It must not have flames or sparks near the fuel. Before refueling, allow the chainsaw to cool completely. Do not attempt to refuel when the engine is hot. -
Page 14: Operation
ORIGINAL INSTRUCTIONS 5. OPERATION a. Starting the operation Cold starting Switch on the tool by putting the Start/stop button on the position I (ON). Push the primer bulb 5-7 times, until fuel comes into the primer bulb. Pull the choke lever to the START position. Pull the starter cord until the engine starts. - Page 15 ORIGINAL INSTRUCTIONS Let the tool to rum a few minutes. Switch off the tool by putting the Start/stop switch on the position O (OFF). c. Grass trimmer operation Trimming Tilt the head slowly to direct debris away from you. If cutting up to a barrier such as fence, wall or tree, approach from an angle where any debris ricocheting off the barrier will fly away from you, Move the line head slowly until the grass is cut right up the barrier, but do not jam (overfeed) the line into the barrier.
-
Page 16: Maintenance & Care
ORIGINAL INSTRUCTIONS Scything weeds This is cutting by swinging the blade in a level arc. It can quickly clear areas of field grass and weeds. Scything should not be used to cut large, tough weeds or woody growths. Scything can be done in both directions, or just in one way which results in the debris being thrown away from you. - Page 17 ORIGINAL INSTRUCTIONS b. Adjusting the carburettor Do not adjust carburettor unless necessary. If you have trouble with the carburettor, see your dealer. Improper adjustment may cause engine damage and void warranty. c. Fuel filter Fuel tank is fitted with a filter. Filter is situated at the free end of fuel pipe. It can be picked with a hook or similar device.
-
Page 18: Troubleshooting
ORIGINAL INSTRUCTIONS 7. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION The tool is not started in the Star the tool by following the instructions correct way given in this manual Problem with the carburettor The carburettor shall be inspected by an authorized service centre The unit does not start Spark plug is worn... -
Page 19: Declaration Of Conformity
Tel : +33 (0)5.34.502.502 Fax : +33 (0)5.34.502.503 Declares that the machines: Brush Cutter & Grass Trimmer Model: RAC52PB-B Serial No.: 20200833434-20200833923 The people name holding the technical file：M. Olivier Patriarca have been designed in compliance with the following standards:... -
Page 20: Warranty
9. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 21: Product Failure
10. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 22: Warranty Exclusions
11. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...