Subscribe to Our Youtube Channel
Related Manuals for Racing RAC450EPHT-UK
Summary of Contents for Racing RAC450EPHT-UK
- Page 1 ORIGINAL INSTRUCTIONS ELECTRIC POLE HEDGE TRIMMER RAC450EPHT-UK INSTRUCTIONS MANUAL Before using electric hedge trimmer for the first time, please read this manual BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux – France MADE IN PRC 2018...
-
Page 2: Table Of Contents
CONTENTS 1. SAFETY WARNING 2. YOUR PRODUCT 3. ASSEMBLY 4. USE 5. MAINTENANCE AND STORAGE 6. DISPOSAL 7. TROUBLESHOOTING 8. DECLARATION OF CONFORMITY... -
Page 3: Safety Warning
1. SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 4 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off.
- Page 5 • Use personal protective equipment. Safety equipment includes at least: safety shoes, safety goggles, ear protectors, protective gloves, etc. • Never work with an unsecured cutting tool. There is a risk of injury from projected objects. • Before starting the hedge trimmer, remove all the keys and inspect if the tool is well assembled and secure.
- Page 6 • Hold the hedge trimmer properly, e.g. with both hands. Cutting times Cutting leaves ....June and October Hedges of conifers ..April and August Evergreen conifer hedges ... from May Intended use Your hedge trimmer is a device used by a person to trim hedges and shrubs by working with one or more blades arranged linearly and back and forth.
- Page 7 Keep bystanders away at least 15m from the area operation Do not expose the electric hedge trimmer to the rain or humidity Caution ： Very dangerous because of electric shock! Keep away at least from Transmission lines Pull the plug out from the socket immediately when the cable is damaged or entangled or split Be careful of sharp blades.
-
Page 8: Your Product
2. YOUR PRODUCT a. Description 1- Blade 2- Setting of the height of the tool 3- Attachment for shoulder trap 4- Pole 5- Switch lock release button 6- Handle 7- ON/OFF switch 8- Power plug 9- Wrench 10- Shoulder trap 11- Cover protection of the blade... - Page 9 Technical data Model RAC450EPHT-UK Voltage 230-240V~, 50 Hz Power 500W Protection class Class II Speed 1600/min Weight 3.95kg Cutting length 460mm Sound pressure level lpa 83.28 dB (A) Uncertainty K 2 dB (A) Sound power level lwa 91.28 dB (A)
-
Page 10: Assembly
3. ASSEMBLY Please follow the instructions for assembly carefully. A tool non-correctly assembled will cause accidents and injuries. Check, after unpacking, if the tool is complete and not damaged. If not complete or damaged, do not use the tool and bring it back to your dealer. The assembly and the setting of the height must be done with the appliance unplugged, the blade covered with its protection. -
Page 11: Use
4. USE • Be sure that the tool is correctly assembled. • Inspect the working area. Remove all materials and objects which can damage the tool or create accidents. • Remember that you must wear full protective equipment and put the bystanders far away from the working area. - Page 12 b. Cutting techniques • Move the vertical section of the electric hedge trimmer evenly forward or do curved movements up and down. • In order to keep long straight lines, we recommend stretching cords. • It is recommended to cut hedges into trapezoidal shape to avoid lower branches getting naked. Doing so corresponds to the natural growth of plants and hedges can thrive optimally.
-
Page 13: Maintenance And Storage
5. MAINTENANCE AND STORAGE Maintain your tool regularly. This will keep your tool in good working order and extend its lifespan. Do not use abrasive, caustic agents to clean the tool. These types of products will damage your tool. Do not perform repairs by yourself. Repairs and inspection must be carried out by a competent person or at an authorized service center (please contact you service dealer). -
Page 14: Disposal
6. DISPOSAL Electrical products should not be discarded with household products. According to the European Directive 2012/19/EC on waste electrical and electronic equipment and its implementation into national law, electrical products used must be collected separately and disposed of at collection points provided for this purpose. -
Page 15: Declaration Of Conformity
EC Declaration of conformity BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux – France declare that the machine Designation: ELECTRIC POLE HEDGE TRIMMER Model: RAC450EPHT-UK Serial number: Is in conformity with the European Directives: Machine Directive 2006/42/EC EMC Directive 2014/30/EU...
Need help?
Do you have a question about the RAC450EPHT-UK and is the answer not in the manual?
Questions and answers