Setup > Reset; Setup > System Info - Fractal VP4 Owner's Manual

VP4 OWNER'S MANUAL
SETUP > Reset
PARAMETER
Reset System Parameters
Clear All Presets
SETUP > System Info
PARAMETER
Description
This utility resets ALL parameters in the SETUP menu and Tuner back to factory default values.
Resetting system parameters can be useful during troubleshooting.
Importantly, this action does not delete or modify your presets.
You will be prompted to press SAVE and then ENTER to confirm.
IMPORTANT: Always turn your amp or speakers off before performing RESET SYSTEM PARAMETERS on the VP4 . 1) Resetting
system parameters is irreversible; 2) This option can change audio levels; 3) In a rig wired for 4CM, you will need to manually change
4CM Routing back to ENABLED after performing a Reset.
This utility allows you to Clear all Presets. You will be prompted to press ENTER to confirm. Be very careful with this option—erasing
presets is irreversible!
If you want to restore the factory presets instead, follow these steps:
 Visit the Download page for the VP4 and download the latest Factory Presets file.
https://www.fractalaudio.com/vp4-downloads
◽ On Windows, you'll need to unzip the downloaded file. Mac OS does this automatically.
 Open VP4-Edit, launch Fractal-Bot from the Tools menu, and follow these steps:
◽ In Section 2 - CHOOSE A FILE TO SEND, browse to the SysEx file you downloaded.
◽ Press Begin and then SEND. Allow the transfer to complete. Once done, close Fractal-Bot.
◽ In VP4-Edit, choose Refresh Preset Names from the Preset Menu.
Description
This screen shows the current firmware version, the date it was released, and CPU usage level.
THE SETUP MENU
52