Usb; Windows Minimum Requirements - Fractal VP4 Owner's Manual

VP4 OWNER'S MANUAL

USB

USB provides the VP4 with a host of great audio features. With 2×2 channels,
you can record the VP4's outputs or its inputs, play back computer audio at
the outputs of the VP4, or send computer audio the VP4 for processing.
USB INPUTS (RECORDING)
1 2
INPUTS
3 4
L
R
USB OUTPUTS (PLAYBACK)
OUTPUTS
1 2
L
USB PLAYBACK LEVEL
3 4
FAQ: Why would USB cause noise or hum?
A computer can create a ground loop with a guitar amp when the VP4 is
connected to both. To address this, consider using a USB Audio Ground
Loop Eliminator (Type C > C) between the VP4 and the computer, or an audio
isolation transformer between the VP4 and the amp. AIso, if you're using a
laptop, try switching from AC power to battery power or vice versa.
Processor
Record stereo processed audio
Output from the VP4 outputs.
Record unprocessed audio
IN 1 L+R
from the VP4 input(s)
Play Computer Audio
OUT 1 L+R
R at the VP4 output.
Route Computer Audio
Processor
to the VP4 for processing.
Input
USB
MAC OS MINIMUM REQUIREMENTS
OS: OS X 10.13 or newer. (Older versions may work but are not supported).
CPU: Intel Processor or Apple Silicon.
Memory: 512MB minimum.
USB: USB 2.0 support required.
Driver: No driver is required for Mac OS.

WINDOWS MINIMUM REQUIREMENTS

OS: Windows 10 or newer
CPU: Intel Core 2 @1.6 GHz or better, or AMD equivalent.
Memory: 1GB minimum.
USB: USB 2.0 support required.
Driver: A USB driver is required for Windows operating systems. The Windows
driver can be downloaded from http://www.fractalaudio.com/vp4-downloads
15