Fractal VP4 Owner's Manual page 3

Declaration of Conformity
Manufacturer's Name: Fractal Audio Systems, LLC
Manufacturer's Address: 4 Wilder Drive, Plaistow, NH 03865 USA
Declares that the product: Name: VP4; Option: None
Conforms to the following directives:
 Electromagnetic Compatibility(EMC) 2014/30/EU
 EN 55032:2015 AMD.1:2020+A11:2020
 EN 55035:2017+A11:2020
 EN IEC 61000-3-2:2019/A1:2021
 EN 61000-3-3:2013AMD.1:2019+ AMD.2:2021
 Low Voltage Directive(LVD) 2014/35/EU
 EN IEC 62368-1: 2020/A11:2020
Clifford Chase
President / CEO
August 21, 2024
Legal Notices
Fractal Audio Systems. VP4 Owner's Manual.
Contents Copyright © 2024. All Rights Reserved.
No part of this publication may be reproduced in any form without the written
permission of Fractal Audio Systems.
"Fractal Audio Systems", the Fractal Audio Systems logo, Axe-Fx, VP4, UltraRes,
DynaCab, are trademarks of Fractal Audio Systems.
Manufacturer names and product names mentioned herein are trademarks or
registered trademarks of their respective owners, which are in no way associated
with or affiliated with Fractal Audio Systems. The names are used only to illustrate
sonic and performance characteristics.
SAFETY
WARNING: To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
CAUTION: To reduce the risk of fire or shock, do not remove screws. No user
serviceable parts inside. Refer servicing to qualified service personnel.
1. Obey all warnings on the VP4 and in this manual.
2. Keep away from sources of heat such as heat ducts, registers or appliances that
produce heat.
3. Keep the AC Adapter in good condition. Do not kink, bend, or pinch power cords.
4. If the cord becomes damaged, discard and replace the adapter.
5. If not using your VP4 for extended periods of time, disconnect from power.
6. Refer servicing to qualified personnel only.
7. Stop operation of the unit and obtain service if:
8. Liquids or excessive moisture enter the unit.
9. The unit operates incorrectly, or performance is inconsistent or erratic.
10. The unit has been dropped and/or the enclosure damaged.
11. Prolonged exposure to high volume levels can cause hearing damage and/or
loss. The use of hearing protection in high volume situations is recommended.
The VP4 is designed to be used with the included 9V DC 1.3A
negative center power supply. Operating the unit using a supply with
different specifications can cause problems including damage to
your VP4 or other connected equipment.
EMC/EMI
This equipment has been tested and found to comply with the limits for a Class B
Digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in residential installations.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. There is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the equipment or increase the separation between the devices.
• Connect the equipment to different outlets on different circuits.
•Consult the dealer or an experienced technician for help.