Fractal VP4 Quick Start Manual

Press HOME anytime to show
CONTROLS
the Home page.
Depending on the mode, use the
footswitches to change PRESETS
(green), select SCENES (red), turn
EFFECTS (blue) on or off, or ac-
cess the TUNER/TEMPO menu
(yellow).
Turn the ABCD knobs to make settings
and change values.
The PRESET is displayed here.
The VP4 has 104 presets, grouped
into banks (A-Z) of four presets
each.
MAIN DISPLAY
The SCENE is displayed directly be-
low the preset name.
Each preset consists of four scenes.
See the user manual to learn more
about scenes..
QUICK START GUIDE
THE VIRTUAL PEDALBOARD WITH FOUR SIMULTANEOUS EFFECTS AND MORE
Press SAVE to store the preset. Press ENTER
twice to confirm.
MODE
Turn the SELECT knob to highlight areas on the display.
On the home page, it also changes the MODES.
Title Routing Pages CPU Meter
Effects Mode
4CM
The ABCD icons above indicate their respective
functions, which change depending on the page.
Press HOME & SAVE at the same time to display MODE SELECT. Select
the mode with a footswitch.
The PAGE buttons are used to scroll pages left and right. An icon indicates the
current position.
Use the ENTER & EXIT buttons to confirm or
discard various options..
SETUP
Press ENTER & EXIT simultaneously to access the SETUP menu. Use the PAGE
buttons to access the pages for Audio, Footswitches, Pedals, MIDI, Global, Reset,
and System Info. Press EXIT to exit the SETUP menu.
NOTE: Changes made in the Setup menu do not need to be saved. As soon as you make
changes, 'SAVING...' appears at the top of the display. Do not turn off the VP4 during the
saving process. Changes may be lost..
Tempo
'Edited'-Indicator
CPU:63%
Each preset consists of up to four
effects. You'll find distortion, delay,
reverb and many more.
The letter below the effect shows its current 'channel'. Each
effect has four independent channels. See the user manual
for more information.