Page 2
USING. Before you start to install and use the sauna heater check the following: - that you have got all the parts needed. - check that the voltage of the heater and the control box is the right one and that the control box suits your heater.
Page 3
SENSOR UNIT The sensor unit should be plased in accordance with the measures stipulated in fig. 1. The sensor unit is provided with long heat resisting (T170 C) 4x0,5mm cables. These cables can be extended by a normal weak current cables. For connection of the sensor unit control panel, please see fig.
Fig 1 1. Timer knob in control panel 2. Sensor unit 3. Heat resisting cable 4. Feeder cable to heater 5. Junction box 6. Connection cable to heater 7. Fastening hole 8. Upper bench or quard rail in frant or on the side of the heater. 9.
Page 5
1,2,3,4,5,6 1,2,3,4,5,6 15,0 380V 3N~, 400V 3N~, 415V 3N~ Yksi tehoryhmä, En effekt grupp, One effektgroup 354 SKLE 17 D Ein Stufe 8 11 1,5mm max 200W 1. Syöttö/ Nätet/Power input/ Stromnetz . 2. Kiuas/ Bastuugn/ Sauna heater/Saunaofen. 3. Saunavalo/ Bastu belysning/ Sauna light/ Sauna Beleuchtung 4.
Need help?
Do you have a question about the SKLE and is the answer not in the manual?
Questions and answers