Gigabyte GA-8N-SLI Quad Royal User Manual page 93

Step 1:
Install Windows 2000 onto a selected hard drive. Download and install Windows 2000 Service Pack 4
from Microsoft's website.
Step 2:
After system restarts, press Del to enter system BIOS Setup during POST (Power-On Self Test). Under
the Integrated Peripherals menu (Figure 21) assure the SATA port connecting the SATA hard disk (the
one containing the Windows 2000) is Enabled (Figure 21/22). Save settings and exit the BIOS setup.
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
IDE/SATAII RAID Config
On-Chip USB
USB Keyboard Support
USB Mouse Support
AC97 Audio
Onboard LAN2 Function
Onboard LAN Function
Onboard 1394 Function
Onboard Serial Port 1
i-Lock
UART Mode Select
x UR2 Duplex Mode
Onboard Parallel Port
Parallel Port Mode
: Move Enter: Select
F3: Language
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
On-Chip IDE Channel0
On-Chip IDE Channel1
IDE1 Conductor Cable
IDE2 Conductor Cable
Serial-ATAII 1
Serial-ATAII 2
IDE/SATAII RAID function
IDE Primary Master RAID
IDE Primary Slave RAID
IDE Secndry Master RAID
IDE Secndry Slave RAID
SATAII 1 Primary RAID
SATAII 1 Secondary RAID
SATAII 2 Primary RAID
SATAII 2 Secondary RAID
: Move Enter: Select
F3: Language
Integrated Peripherals
[Press Enter]
[V1.1+V2.0]
[Disabled]
[Disabled]
[Auto]
[Auto]
[Enabled]
[Enabled]
[3F8/IRQ4]
[Enabled]
[Normal]
Half
[378/IRQ7]
[SPP]
+/-/PU/PD: Value
F5: Previous Values F6: Fail-Safe Defaults
Figure 21
IDE/SATAII RAID Config
[Enabled]
[Enabled]
[Auto]
[Auto]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
+/-/PU/PD: Value
F5: Previous Values F6: Fail-Safe Defaults
Figure22
- 93 -
Item Help
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
Item Help
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
F1: General Help
F1: General Help
Appendix