Step 4:
Double-click MENU.exe. An MS-DOS prompt screen similar to Figure 14 below will appear
Step 5:
Insert an empty floppy disk and select the nVIDIA Serial ATA driver by pressing the corresponding letter
from the menu (for example, from the menu in Figure 14, press C to select nVIDIA CK804 Series Raid
(XP) if you wish to install Windows XP or press E to select nVIDIA CK804 Series Raid (2K) if you
wish to install Windows 2000). Then it will take about one minute to copy the SATA driver from the
motherboard driver CD to the floppy disk.
Step 6:
Press 0 to exit when the procedure is complete.
(Note): The name of the drivers in the menu might differ, depending on the version of your
driver CD-ROM disk.
Figure 14
- 89 -
.
(Note)
Appendix