Gigabyte GA-8N-SLI Quad Royal User Manual page 86

Step 5:
Next, select the hard drives which you wish to be included in the disk array. The Free Disks section
displays the information about the currently installed SATA hard drives. Press the TAB key to move to
the Free Disks section. Select the target hard drives using the UP or DOWN ARROW key and use the
RIGHT ARROW key to add the hard drives to the Array Disks section (Figure 8).
RAID Mode: Mirroring
Free Disks
Loc Disk Model Name
[ESC] Quit [F6] Back
Step 6:
Press F7 after selecting the target hard disks. A message which says "Clear disk data?" will appear
(Figure 9). If you are sure to clear the data in the selected hard drives, press Y. (If the hard drives
contain previously created RAID array, you need to press Y to clear the data from the hard drives.)
RAID Mode: Mirroring
Free Disks
Loc Disk Model Name
[ESC] Quit [F6] Back
GA-8N-SLI QUAD Royal Motherboard
MediaShield RAID Utility Feb 8 2005
- Define a New Array -
Striping Block:
Array Disks
Loc
2.0.M
[ ] Add 2.1.M
[ ] Del
[F7] Finish [TAB] Navigate
Figure 8
MediaShield RAID Utility Feb 8 2005
- Define a New Array -
Striping Block:
Array Disks
Loc
Clear disk data ?
1.0.M
1.1.M
[ ] Add
[Y] YES [N] NO
[ ] Del
[F7] Finish [TAB] Navigate
Figure 9
- 86 -
Optimal
Disk Model Name
ST3120026AS
ST3120026AS
[ ] Select [ENTER] Popup
Optimal
Disk Model Name
ST3120026AS
ST3120026AS
[ ] Select [ENTER] Popup