Gigabyte GA-8N-SLI Quad Royal User Manual page 30

13) PWR_LED
PWR_LED is connected with the system power indicator to indicate whether the system is on/off.
It will blink when the system enters suspend mode.
14) F_PANEL (Front Panel Jumper)
Please connect the power LED, PC speaker, reset switch and power switch etc of your chassis front
panel to the F_PANEL connector according to the pin assignment below.
HD (IDE Hard Disk Active LED) (Blue)
SPEAK (Speaker Connector) (Amber)
RES (Reset Switch) (Green)
PW (Power Switch) (Red)
MSG(Message LED/Power/Sleep LED)
(Yellow)
NC ( Purple)
GA-8N-SLI QUAD Royal Motherboard
Pin No.
1
1
2
3
Message LED/
Power
Power/
Switch
Sleep LED
2
1
Reset Switch
IDE Hard Disk Active LED
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 1: Power
Pin 2- Pin 3: NC
Pin 4: Data(-)
Open: Normal
Close: Reset Hardware System
Open: Normal
Close: Power On/Off
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
NC
- 30 -
Definition
MPD+
MPD-
MPD-
Speaker Connector
20
19