Gigabyte GA-8N-SLI Quad Royal User Manual page 47

SATAII 2 Secondary RAID
Enabled Enable SATAII 2 2nd SATA RAID function.
Disabled Disable this function.(Default value)
On-Chip USB
V1.1+V2.0 Enable USB 1.1 and USB 2.0 controllers. (Default Value)
V1.1 Enable only USB 1.1 controller
Disabled Disable onchip USB support.
USB Keyboard Support
Enabled Enable USB keyboard support.
Disabled Disable USB keyboard support. (Default value)
USB Mouse Support
Enabled Enable USB mouse support.
Disabled Disable USB mouse support. (Default value)
AC97 Audio
Auto Autodetect onboard AC'97 audio function. (Default value)
Disabled Disable this function.
Legacy USB storage detect
Enabled
Disabled
Onboard LAN2 Function (Marvell 88E1111)
Auto Autodetect onboard LAN2 chip function.(Default value)
Disabled Disable onboard LAN2 chip function.
Onboard 1394 Function
Enabled Enable onboard IEEE1394 function.(Default value)
Disabled Disable onboard IEEE1394 function.
Onboard LAN Function (Agere ET1310)
Enabled Enable onboard LAN chip function. (Default value)
Disabled Disable onboard LAN chip function.
Onboard Serial Port 1
Auto BIOS will automatically setup the port 1 address.
3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value)
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8/IRQ3.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8/IRQ4.
2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8/IRQ3.
Disabled Disable onboard Serial port 1.
i-LOCK
Enabled Enable the i-Lock function. (Default value)
Disabled Disable i-Lock function.
UART Mode Select
This item allows you to determine which Infra Red(IR) function of Onboard I/O chip.
Normal Set onboard I/O chip UART to Normal Mode. (Default Value)
IrDA Set onboard I/O chip UART to IrDA Mode.
ASKIR Set onboard I/O chip UART to ASKIR Mode.
SCR Set onboard I/O chip UART to SCR Interface.
Enable USB storage device boot.(Default value)
Disable this function.
- 47 - BIOS Setup