Gigabyte GA-8N-SLI Quad Royal User Manual page 46

IDE1 Conductor Cable
Auto BIOS autodetects IDE1 conductor cable .(Default Value)
ATA66/100/133 Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure your IDE
device and cable are compatible with ATA66/100/133).
ATA33 Set IDE1 Conductor Cable to ATA33. (Please make sure your IDE device
and cable are compatible with ATA33)
IDE2 Conductor Cable
Auto BIOS autodetects IDE2 conductor cable. (Default Value)
ATA66/100/133 Set IDE2 Conductor Cable to ATA66/100/133. (Please make sure your IDE
device and cable are compatible with ATA66/100/133)
ATA33 Set IDE2 Conductor Cable to ATA33. (Please make sure your IDE device
and cable are compatible with ATA33)
Serial-ATAII 1 (Onboard nVIDIA chipset)
Enabled Enable Serial-ATAII 1 support. (Default Value)
Disabled Disable Serial-ATAII 1 support.
Serial-ATAII 2 (Onboard nVIDIA chipset)
Enabled Enable Serial-ATAII 2 support. (Default Value)
Disabled Disable Serial-ATAII 2 support.
IDE/SATAII RAID function
Enabled Enable IDE/SATAII function.
Disabled Disable IDE/SATAII function.(Default value)
IDE Primary Master RAID
Enabled Enable 1st master channel IDE RAID function.
Disabled Disable this function. (Default value)
IDE Primary Slave RAID
Enabled Enable 1st slave channel IDE RAID function.
Disabled Disable this function. (Default value)
IDE Secndry Master RAID
Enabled Enable 2nd master channel IDE RAID function.
Disabled Disable this function. (Default value)
IDE Secndry Slave RAID
Enabled Enable 2nd slave channel IDE RAID function.
Disabled Disable this function. (Default value)
SATAII 1 Primary RAID
Enabled Enable SATAII 1 1st SATA RAID function.
Disabled Disable this function.(Default value)
SATAII 1 Secondary RAID
Enabled Enable SATAII 1 2nd SATA RAID function.
Disabled Disable this function.(Default value)
SATAII 2 Primary RAID
Enabled Enable SATAII 2 1st SATA RAID function.
Disabled Disable this function.(Default value)
GA-8N-SLI QUAD Royal Motherboard - 46 -