Related Manuals for WAREMA Perea P20
Summary of Contents for WAREMA Perea P20
- Page 1 Operating and maintenance instructions WAREMA pergola awning Perea Original instructions To be handed over to the opera- tor. Please keep for future use. Valid from 2 June 2023 Document number 2048234 [Rev. 6 - en]...
-
Page 2: Table Of Contents
Table of contents Table of contents Introduction........................3 Information on safety............................ 3 Information on the target group and application of these instructions............3 Explanation of the signal words........................3 Basic safety instructions..........................3 Product information......................5 Intended use..............................5 Parts description............................5 Technical data...............................6 Wind resistance............................ -
Page 3: Introduction
They Incorrect operation can result in personal injury. The describe how to operate products with WAREMA standard movements of the product can lead to crushing of the limbs. drives. Other drives and special solutions are not dealt with. - Page 4 Introduction Operation in the event of a power supply interruption Operation in icy conditions/winter (general procedure) An electrically-operated product cannot be operated without The operation of the product with temperatures around or power. extended product may be subjected to impermissible below the freezing point can lead to malfunctions and/or loads when bad weather fronts pass over or during power damage to property in the case of unfavourable installation...
-
Page 5: Product Information
Reinforcement profile 11 Base plate it to become detached from the wall and are therefore Pole attachment Awning fabric not permitted. WAREMA will not be liable for any ensuing Fig. 1: Parts overview of pergola awning Perea P20 damage. secudrive guide ®... -
Page 6: Technical Data
< 70 dB (A) Declaration of performance The declaration of performance can be The sound pressure level LpA in a standard found at (www.warema.de/ce). installation of the product on a test stand is ≤ 70 dB(A). This value may vary depending on the specific installation. -
Page 7: Operation
Operation Operation Operation using a central control unit NOTICE INFO Product damage from incorrect behaviour when a bad weather front passes over! Only operate the product if it is in technically perfect condition. The product is an external sun shading system that Do not operate a product if it is damaged. - Page 8 Operation Danger of crushing, shearing and entanglement Operation in wet weather INFO While the product is Water drainage can only be ensured when the moving, keep persons awning is fully extended. away from the product. While the product is NOTICE moving, do not reach Deterioration of awning fabric due to moisture! between the moving...
-
Page 9: Service
WAREMA void. Leaves and other foreign Proper and regular cleaning and maintenance and the objects can cause malfunc-... - Page 10 It is important to abide by the interval of one year. Tip/recommendation Using the WAREMA cleaning glove together with Purpose of cleaning and care WAREMA cleaning agent concentrate for sun shading products is an ideal way to properly clean The benefit provided by regular and proper cleaning and product surfaces.
- Page 11 Vacuum cleaner (optional) the procedure as needed based Bucket on the degree of soiling. Low-calcium water (recommendation) WAREMA cleaning agent for sun shading products (do not use on wood products) WAREMA cleaning glove Remove the detached soiling Cotton cloth before drying.
-
Page 12: Maintenance
INFO To ensure proper functioning and your continued Re-impregnating the awning fabric enjoyment of the product, WAREMA recommends having it professionally maintained once a year. INFO The cleaning agent and fabric impregnation have Information on this can be obtained from opposing effects. -
Page 13: Repair
To order, contact your WAREMA dealer. Weave flaws Spinning of the yarns as well as warping in the weaving mill and the weaving process itself is executed under tension. -
Page 14: Dismantling/Disposal
Have the units dismantled by a qualified specialist. Dismantling of the product must be undertaken by a qualified specialist. Ask WAREMA for any missing documents before commencing maintenance. INFO Electrically operated products contain integrated electrical or electronic components, such as the motor, control and lines. -
Page 15: Troubleshooting
Troubleshooting Troubleshooting INFO Problems described here without reference to a qualified specialist or certified electrician may be resolved independently. All other problems listed must be handled by a qualified specialist or certified electrician. Fault: The motor is not functioning. Cause Remedy Note The thermal protection switch on the... -
Page 16: Declaration Of Conformity
Used for motor drives without an integrated radio receiver. Directive on radio equipment 2014/53/EU (RED): Use for motor drives with an integrated radio receiver or for WAREMA components with an integrated radio receiver. Person in charge of the compilation of the technical documents: Elke Granzer; for address, see manufacturer.
Need help?
Do you have a question about the Perea P20 and is the answer not in the manual?
Questions and answers