Related Manuals for InHand IR315
Summary of Contents for InHand IR315
-
Page 1: Table Of Contents
InHand Networks Industrial Router IR315 Product Quick Guide Table of contents Overview 1. Packing List 2. Panel Introduction 3. Installation 3.1 SIM Card Installation 3.2 Antenna Installation 4. Access the Internet 4.1 Wired Access 4.2 SIM Card Dial-up 4.3 Wi-Fi to Internet 5. -
Page 2: Packing List
This manual is a guide for the installation and operation of IR315 routers from InHand Networks. Please confirm the product model and packaging accessories (power terminal, antenna), and purchase SIM cards from local network operators. All statements, information and recommendations in this manual do not constitute any expressed or implied warranty. -
Page 3: Installation
Check for cables and connectors required for installation. 3.1 SIM Card Installation IR315 supports dual nano SIM cards. Stick Stab the hole on the left of the SIM card slot to eject it. Then insert a SIM card. 3.2 Antenna Installation Rotate the metal interface clockwise until the movable part cannot be rotated, do not hold the black glue stick to... -
Page 4: Wired Access
4.1 Wired Access Step 1: Connect power and Ethernet cable to IR315, connect WAN/LAN1 port to public network, and one of LAN to PC. Step 2: Configure the PC to be in the same network segment as the IP address of the router. -
Page 5: Sim Card Dial-Up
ADLS Dialup (Click Apply & Save after configure manually). Obtain IP address by Dynamic Address (DHCP) Obtain IP address by Static IP Obtain IP address by ADSL Dialup Step 5: Check the connectivity in “Tools > PING”. 4.2 SIM Card Dial-up https://help.inhand.com/portal/en/kb/articles/industrial-router-ir315-product-quick-guide... -
Page 6: Wi-Fi To Internet
AP mode (default mode): IR315 acts as an access point to radiate wireless signals, and other terminal devices can connect this device to access the Internet. It is necessary to ensure that IR315 itself has been connected to the Internet through wired or cellular. AP mode supports setting SSID name and encryption authentication mode, and terminal devices will need to input a password when connecting. -
Page 7: Quick-Use Guidance
1. Press the RESET button immediately after powering on the device. 2. The system indicator will blink after a few seconds, and after blinking for about half a minute, it will be steady. 3. Release the RESET button, the System indicator will blink, and press the RESET button again. https://help.inhand.com/portal/en/kb/articles/industrial-router-ir315-product-quick-guide... -
Page 8: Import/Export Configuration
Make sure that the router is already connected to the Internet. Click "Service>>Device Manager" to set the router to connect to DM. iot.inhand.com.cn is the server for China, and iot.inhandnetworks.com is the server for global. Fill in your DM account in Registered Account then click "Apply" to save the configuration. -
Page 9: Description Of Indicators
6. Description of Indicators IR315 Status Red off --- Power off Steady in red --- Power on Green off --- System error Blink in Green --- System Upgrading Steady in Green --- System working Green off --- Wi-Fi disable Wi-Fi...
Need help?
Do you have a question about the IR315 and is the answer not in the manual?
Questions and answers