InHand InRouter305 User Manual
  1. Manuals
  2. Brands
  3. InHand Manuals
  4. Network Router
  5. InRouter305
  6. User manual

InHand InRouter305 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
InRouter305 Industrial Router
User Manual
Issue: V1.0— August, 2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the InRouter305 and is the answer not in the manual?

Questions and answers

Related Manuals for InHand InRouter305

Summary of Contents for InHand InRouter305

  • Page 1 InRouter305 Industrial Router User Manual Issue: V1.0— August, 2021...
  • Page 2 The contents of this manual cannot be copied or reproduced in any form without the written permission of InHand. Due to continuous updating, InHand cannot promise that the contents are consistent with the actual product information, and does not assume any disputes caused by the inconsistency of technical parameters.
  • Page 3 UL MARKINGS: 1.UL File：E364742、E509340. 2.Electrical ratings：Input: 9-36 Vdc, 0.1-0.2A. (Optional) 3.Model number：IR305 5.Ambient temperature range：-20 C to +70 C 6. Temperature class：T-5 7.Class I, Division 2, Groups A, B, C and D Hazardous Locations UL INSTALLATION AND OPERATING INSTRUCTIONS: 1.These devices are open-type devices that are to be installed in an enclosure suitable for the environment and where the internal compartment is only accessible by the use of tool.

  • Page 4: Table Of Contents

    Contents I. INTRODUCTION..........................1 1.1 OVERVIEW ........................... 1 1.2 PANEL INTRODUCTION ......................1 1.3 LED INDICATION &SIGNAL ...................... 2 1.4 R ......................3 ESET TO DEFAULT SETTINGS II. INSTALLATION ..........................4 2.1 PREPARATIPNS ..........................4 2.2 INSTALLATION ..........................5 2.2.1 SIM/UIM Card ........................5 2.2.2 Antenna ...........................
  • Page 5 3.2.5 WLAN Client (AP Mode) ..................... 18 3.2.6 WLAN Client (STA Mode) ....................19 3.2.7 Link Backup .......................... 19 3.2.8 VRRP ............................ 20 3.2.9 IP Passthrough ........................21 3.2.10 Static Route ......................... 22 3.2.11 OSPF ........................... 22 3.3 SERVICE ............................22 3.3.1 DHCP service ........................
  • Page 6 3.5.1 IP BW Limit .......................... 37 3.6 VPN .............................. 37 3.6.1 IPSec Settings........................39 3.6.2 IPSec Tunnels ........................40 3.6.3 GRE Tunnels ......................... 41 3.6.4 L2TP Client ........................... 43 3.6.5 PPTP Client ........................... 45 3.6.6 OpenVPN ..........................45 3.6.7 OpenVPN Advanced ......................47 3.6.8 Certificate Management ......................
  • Page 7 3.9.11 Third Party Software Notices ....................55 APPENDIX A FAQ ..........................56 APPENDIX B INSTRUCTION OF COMMAND LINE ............... 58...

  • Page 8: Introduction

    I. INTRODUCTION 1.1 OVERVIEW The InRouter305 (IR305) is an IoT cellular router that integrates 4G LTE, Wi-Fi, and VPN technologies to provide an easy, reliable, and secure Internet connectivity. With technologies such as 4G wireless wide area network and Wi-Fi wireless local area network, it provides uninterrupted...

  • Page 9: Led Indication &Signal

    1.3 LED INDICATION &SIGNAL ER305 指示灯 LED 灯状态和定义 Red off --- Power off Steady in red --- Power on Green off --- System error Blink in Green --- System upgrading Steady in Green --- System working Green off --- Wi-Fi disable Wi-Fi Blink in Green --- Wi-Fi connecting Steady in Green --- Wi-Fi working...

  • Page 10: Reset To Default Settings

    1.4 Reset to default settings 1. When the device is powered on, press the reset button immediately and keep it for 10 seconds until the SYS is steady on 2. Loosen the Reset button the SYS will off. 3. Immediately press and hold the Reset button, SYS will flash, then loosen the Reset button. Then device will reset to default settings.

  • Page 11: Installation

    Please be sure there is 3G/4G network coverage and there is no shield on site. 220V AC or 9~36VDC shall be provided on site. First installation shall be done under direction of the engineer recognized by InHand Networks.  1 PC...

  • Page 12: Installation

    2.2.1 SIM/UIM Card InRouter305 uses pop-up card holder. Stab the hollow at the left of the card holder and the card holder will pop up. Then, install the SIM/UIM card and press the card holder back to the card slot.
  • Page 13 LAN" is checked; if it is checked, please cancel and click the button <OK>. IV. Log in/Exit Web Settings Page Open IE or other browser and enter IP address of InRouter305, such as http://192.168.2.1 in address bar (default setting of InRouter305). Upon connection, log in from the login interface as Admin, i.e.

  • Page 14: Web Configuration

    III. WEB CONFIGURATION The device need to be effectively configured before using. This chapter will introduce how to configure your router via Web. 3. 1 SYSTEM Here, system and network state and system time of synchronizing device and PC can be checked and router WEB configuration interface language can be set as well as the name of mainframe of router can be customized.

  • Page 15: Admin Access

    Click <Sync Time> to synchronize the time of the gateway with the system time of the host. Parameters of System Time Table 3-1-2 System Time Function description: Set local time zone and automatic updating time of NTP. Parameters Description Default Time of Router Display present time of router 8:00:00 AM, 12/12/2015...
  • Page 16 API. From the navigation tree, select System >> Admin Access, then enter “Admin Access” page. Table 3-1-3 Parameters of Admin Access Admin Access Function description: 1. Modify username and password of router. 2. The router may be set by the following 5 ways, i.e. http, https, telnet, SSHD and console. 3.

  • Page 17: System Log

    password) Username Configure console login user, custom Password Configure the password, custom Other Parameters Set login timeout (router will automatically disconnect 500 seconds Timeout the configuration interface after login timeout)  In “Username/Password” section, users can modify username and password rather than create new username, i.e.

  • Page 18: Schedule

    reset the router. From the navigation tree, select System >> Config Management, then enter the “Config Management” page. Table 3-1-5 Parameters of Configuration Management Configuration Management Function description: Set parameters of configuration management. Parameters Description Default Browse Choose the configuration file Import Import configuration file to router Backup...

  • Page 19: Upgrade

    3.1.7 Upgrade The upgrading process can be divided into two steps. In the first step, upgrading files will be written in backup firmware zone, in the second step: files in backup firmware zone will be copied to main firmware zone, which should be carried out during system restart. During software upgrading, any operation on web page is not allowed, otherwise software upgrading may be interrupted.
  • Page 20 Parameters Description Default Enable Enable PPP dialup. Enable Time Schedule Set time schedule Enable—Local device connected to Router Shared connection can access to the Internet via Router. Enable (NAT) Disable—Local device connected to Router cannot access to the Internet via Router. Default Route Enable default route Enable...

  • Page 21: Wan

    represents not to enable ICMP detection. ICMP Detection Set ICMP Detection Interval 30 s Interval ICMP Detection Set ICMP Detection Timeout (the detection 20 s Timeout server will reboot if ICMP times out) Set the max. number of retries if ICMP fails ICMP Detection Retries (redial if reaching max.
  • Page 22 Router cannot access to the Internet via Router. Default route Enable default route Enable 00:18:05:08:07:3D (provided MAC Address MAC Address of the device InHand Networks), provided for device manufacturer IP Address Set IP address of WAN 192.168.1.29 255. 255. 255.
  • Page 23 Default route Enable default route Enable 00:18:05:08:07:3D (provided MAC Address MAC Address of the device InHand Networks), provided for device manufacturer Max. transmission unit, default/manual default (1500) settings Table 3-2-2-3 ADSL Dialing (PPPoE) Parameters of WAN WAN - ADSL Dialing (PPPoE) Function description: Set ADSL dialing parameters.

  • Page 24: Vlan

    Parameters of Advanced Options Service Name Set service name Set length of transmit queue. Set length of transmit queue. Enable IP header Click to enable IP header compression Disable compression Use Peer DNS Click to enable use peer DNS Enable Link detection interval Set link detection interval 55 s...

  • Page 25: Switch Wlan Mode

    Six type for options: 802. 11g/n, 802. 11g, 802. 11n, 802. Mode 802.11b/g/n 11b, 802. 11b/g , 802. 11b/g/n Channel Select the channel SSID SSID name defined by user inhand Support open type, shared type, auto selection of WEP, Authentication WPA-PSK, WPA, WPA2-PSK, WPA2, WPA/WPA2, Open type method WPAPSK/WPA2PSK Encryption...

  • Page 26: Wlan Client (Sta Mode)

    Mode Support many modes including 802.11b/g/n 802.11b/g/n SSID Name of the SSID to be connected inhand Authentication method Keep consistent with the access point to be Open type connected Encryption Keep consistent with the access point to be NONE connected 3.2.7 Link Backup...

  • Page 27: Vrrp

    ICMP Detection Timeout Set ICMP detection timeout ICMP Detection Retries Set ICMP detection max. retries Backup Link Optional dialup/cellular or WAN Dialup/Cellular Connection Backup mode Optional hot or cold backup Hot backup Parameters of Link Backup - Backup Mode Table 3-2-7-2 Link Backup - Backup Mode Function description: Select the way of link backup.

  • Page 28: Ip Passthrough

    Monitor interface function of VRRP better expands backup function: the backup function can be offered when interface of a certain router has fault or other interfaces of the router are unavailable. When uplink interface is Down or Removed, the router actively reduces its priority so that the priority of other routers in the backup group is higher and thus the router with highest priority becomes the gateway for the transmission task.

  • Page 29: Static Route

    IP Passthrough Enable IP Passthrough Disable Mode Select work mode（DHCP Dynamic/DHCP fix MAC) DHCP Dynamic FIX MAC Set fix MAC address 00：00：00： 00：00：00 DHCP lease Set DHCP lease time and reacquired after expiration 120S 3.2.10 Static Route Static route needs to be set manually, after which packets will be transferred to appointed routes. To set static route, click the "Network >>...

  • Page 30: Dhcp Service

    3.3.1 DHCP service DHCP adopts Client/Server communication mode. Client sends configuration request to Server which feeds back corresponding configuration information, including distributed IP address to the Client to achieve the dynamic configuration of IP address and other information.  The duty of DHCP Server is to distribute IP address when Workstation logs on and ensure each workstation is supplied with different IP address.

  • Page 31: Dns Relay

    between domain name and IP address. Through DNS, user could directly use some meaningful domain name which could be memorized easily and DNS Server in network could resolve the domain name into correct IP address. The device makes analysis on dynamic domain name via DNS.

  • Page 32: Ddns

    3322. org. InRouter305 DDNS service types include QDNS (3322)-Dynamic, QDNS(3322)-Static, DynDNS-Dynamic, DynDNS-Static, DynDNS-Custom and No-IP.com. To set DDNS, click the "Service >> Dynamic Domain Name" menu in the navigation tree, then enter “Dynamic Domain Name”...

  • Page 33: Device Manager

    Disable 3.3.5 Device Manager Inhand provides a software platform to manage devices. The device can be managed and operated via software platform. For instance, the operating status of device can be checked, device software can be upgraded, device can be restarted, configuration parameters can be sent down to device, and transmitting control or message query can be realized on device via Device Manager.

  • Page 34: Snmp

    Server Input address of server Ics.inhand.com.cn Secure Channel Enable Secure Channel Enable 3.3.6 SNMP Network devices are usually sparsely-located on a network. It is time-consuming for the administrator to configure and manage these network devices on site. In addition, if these devices...
  • Page 35 Table 3-3-6-1 SNMPv1 and SNMPv2c Parameters Parameters Description Default Enable Enable/disable the SNMP function. Disabled Set the version of the SNMP protocol used to manage the router. The versions of SNMPv1, v2c, and v3 are available. SNMPv1 is applicable to small-sized networks with simple networking...

  • Page 36: Snmp Trap

    characters. Security Select a security level for the group. The values include NoAuth/NoPriv Level NoAuth/NoPriv, Auth/NoPriv, and Auth/Priv. Read-only Select the SNMP read-only view. Only the default view is defaultView View supported currently. Read-write Select the SNMP read-write view. Only the default view is defaultView View supported currently.

  • Page 37: I/O

    Fill in the community name for SNMPv1 or SNMPv2c, and fill in Security Name None the user name for SNMPv3. The length is 1 to 32 characters. UDP Port Fill in the UDP port number, ranging from 1 to 65535. 3.3.8 I/O Click “Service >>...

  • Page 38: Traffic Manager

    Action Accept or block Accept Description Describe SMS control. 3.3.10 Traffic Manager Choose Services >> Traffic Manager to go to the "Traffic Manager" page. Table 3-3-10 Traffic Manager - Basic Configuration Parameters Traffic Manager Function: Monitor and manage the traffic use of the router. Parameters Description Default...

  • Page 39: User Experience Plan

    3.3.12 User Experience Plan InHand Networks’ User Experience Program is designed to improve the product user experience and customer service quality. You can reject this program. Once you join this program, you understand and agree to the following statements from InHand Networks.

  • Page 40: Filtering

    Basic Setup of Firewall Function description: Set basic firewall rules. Parameters Description Default Default Filter Policy Select accept/block Accept Filter PING detection from Internet Select to filter PING detection Disable Filter Multicast Select to filter multicast function Enable Defend DoS Attack Select to defend DoS attack Enable 3.4.2 Filtering...

  • Page 41: Content Filtering

    3.4.3 Content Filtering Configuration of mapping rules is generally used to disable access to network settings. From navigation tree, select "Firewall>>Content Filtering" menu, then enter “Content Filtering” page. Table 3-4-3 Content - Filtering Parameters Filtering Function description: Set settings of firewall related to filtering and generally set forbidden URL.

  • Page 42: Virtual Ip Mapping

    3.4.5 Virtual IP Mapping Both router and the IP address of the host of intranet can correspond with one virtual IP. Without changing IP allocation of intranet, the extranet can access to the host of intranet via virtual IP. This is always used with VPN. To configure virtual IP mapping, go into the navigation tree, select "Firewall >>...

  • Page 43: Mac-Ip Binding

    3.4.7 MAC-IP Binding If the default process in the basic setting of firewall is disabled, only hosts specified in MAC-IP can have an access to outer net. From the navigation tree, select Firewall >> MAC-IP Binding, then enter the “MAC-IP Binding” page.

  • Page 44: Qos

    Convert address Convert the IP address of destination 0.0.0.0/0all 空 all Convert port Convert the port of destination 3.5 QoS Some applications bring convenience to users, but they also take up a lot of network bandwidth. To ensure all LAN users can normally get access to network resources, IP traffic control function can limit the flow of specified host on local network.
  • Page 45 VPN is for building a private dedicated network on a public network via the Internet. "Virtuality" is a logical network. Two Basic Features of VPN:  Private: the resources of VPN are unavailable to unauthorized VPN users on the internet; VPN can ensure and protect its internal information from external intrusion.

  • Page 46: Ipsec Settings

    3.6.1 IPSec Settings A majority of data contents are Plaintext Transmission on the Internet, which has many potential dangers such as password and bank account information stolen and tampered, user identity imitated, suffering from malicious network attack, etc. After disposal of IPSec on the network, it can protect data transmission and reduce risk of information disclosure.

  • Page 47: Ipsec Tunnels

    3.6.2 IPSec Tunnels From navigation tree, select VPN>>IPSec Tunnels, enter "IPSec Tunnels" and click <add>. Table 3-6-2 Parameters of IPSec Tunnels IPSec Tunnels Function description: Configure IPSec tunnels Parameters Description Default Disable(open advanced Show Advanced Options Click to enable advanced options options after enabling) Basic parameters Tunnel Name...

  • Page 48: Gre Tunnels

    XAUTH Mode Click to enable XAUTH mode Disable XATUTH username User defines XATUTH username XATUTH password User defines XATUTH password MODECFG Click to enable MODECFG Disable Phase II Parameters IPSec Strategy Multiple strategies available 3DES-MD5-96 IPSec Life Cycle Set IPSec life cycle 3600 s Perfect Forward...
  • Page 49 X Network X Network GRE Tunnel Along with the extensive application of IPv4, to have messages from some network layer protocol transmitted on IPv4 network, those messages could by encapsulated by GRE to solve the transmission problems between different networks. In following circumstances GRE tunnel transmission is applied: ...

  • Page 50: L2Tp Client

    Enable Click to enable GRE Enable Name User defines name of GRE tunnel tun0 Local visual IP Set local virtual IP 0. 0. 0. 0 Destination Address Set remote IP address 0. 0. 0. 0 Peer visual IP Set peer virtual IP 0.
  • Page 51 Enterprise Enterprise Branch Headquarter L2TP Tunnel Dialling User L2TP Tunnel Mobile Office Staff (L2TP Dialling Software) From navigation tree, select VPN>>L2TP Client, enter "L2TP Client" and click <add>. Table 3-6-4 Parameters of L2TP Client 3 L2TP Client Function description: Configure parameters of L2TP client. Parameters Description Default...

  • Page 52: Pptp Client

    Enable Debug Enable debug mode. Disable Expert Option (not Set expert option, not recommended recommended) 3.6.5 PPTP Client From navigation tree, select VPN>>PPTP Client, enter "PPTP Client" and click <add>. Table 3-6-5 Parameters of PPTP Client 4 PPTP Client Function description: Configure parameters of PPTP client. Parameters Description Default...
  • Page 53 preset private key, third-party certificate or username/password. OpenSSL encryption library and SSLv3/TLSv1 protocol are massively used. In OpenVPN, if a user needs to access to a remote virtual address (address family matching virtual network card), then OS will send the data packet (TUN mode) or data frame (TAP mode) to the visual network card through routing mechanism.

  • Page 54: Openvpn Advanced

    Debug Level Error/warning/information/debug Warning Interface Type TUN/TAP Expert Option (not Set expert option, not recommended recommended) 3.6.7 OpenVPN Advanced From navigation tree, select "VPN>>OpenVPN Advanced" and enter "OpenVPN Advanced" interface. Table 3-6-7 Configuration Parameters of OpenVPN Advanced OpenVPN Advanced Function description: Configure parameters of OpenVPN Advanced. Parameters Description Default...

  • Page 55: Tools

    Enable SCEP (Simple Certificate Enrollment Protocol) Force to Re-enroll Click to enable force to re-enroll Disable The system is "ready to refile an enrollment", Ready to refile Request Status cannot be changed an enrollment Server URL Set server URL Common Name Set common name FQDN Set FQDN...

  • Page 56: Ping

    3.7.1 PING To do a ping, enter the navigation tree, select Tools>>Ping Detection, then enter the “Ping Detection” page. Table 3-7-1 PING Detection Parameters PING Detection Function description: PING outside network. Parameters Description Default Address of the destination host of PING Host detection is required.

  • Page 57: Tcpdump

    Description Default Smart ATM Enable Smart ATM disable Configure parameters of server,Click Server iot.inhand.com.cn Edit to show more information Enable SSL proxy Enable proxy of SSL diable Multi Server Click add to set multi server Configure listener protocol type standard...

  • Page 58: Status Report

    direction 3.8.2 Status Report Select Application >> Status Report, then enter the “Status Report” page. You can set the configuration about Status Report. Table 3-8-2 Smart Report Parameters Status Report Function description: Monitor device status and Report to cloud platform Parameters Description Default...

  • Page 59: Status

    Table 3-8-3 Smart-EMS Parameters Smart-EMS Function description: configure parameters for docking intelligent Smart-EMS cloud platform Parameters Description Default Server URL Fill in server address Username Fill in user name Password Fill in user password Contact interval Set time of contacting interval Send running config Enable send run configuration Disable...

  • Page 60: Alarm

    last day, traffic transmitted on the last day, traffic received in the last hour, and traffic transmitted in the last hour. 3.9.4 Alarm Choose Status >> Alarm to go to the "Alarm" page to view all alarms generated in the system since power-on.

  • Page 61: Device Manager

    and etc. Dialup includes connection type, IP address, netmask, gateway, DNS, MTU, status and connection time. LAN includes connection type, MAC address, IP address, netmask, gateway, MTU and DNS. 3.9.7 Device Manager From navigation tree, select Status >> Device Manager, then enter “Device Manager” page to check the connections status between router and Device Manager.
  • Page 62 3.9.11 Third Party Software Notices From navigation tree, select Status >> Third Party Software Notices, then enter “Third Party Software Notices” page to check the third party software used in router system.
  • Page 63 Appendix A FAQ 1. InRouter is powered on, but can't access Internet through it? Please first check:  Whether the InRouter is inserted with a SIM card.  Whether the SIM card is enabled with data service, whether the service of the SIM card is suspended because of an overdue charge.
  • Page 64 the server ping? Please make sure “Shared Connection” on “Network=>WAN” or “Network=>Dialup” is enabled in the configuration of InRouter. 8. InRouter is powered on, but the Power LED is not on?  Check if the protective tube is burn out. ...
  • Page 65 Appendix B Instruction of Command Line 1 Help Command Help command can be obtained after entering help or “?” into console, “?” can be entered at any time during the process of command input to obtain the current command or help from command parameters, and command or parameters can be automatically complemented in case of only command or command parameter.
  • Page 66 [Example] Enter: show version Display the following information: Type : display the current factory type of equipment Serial number : display the current factory serial number of equipment Description : www.inhand.com.cn Current version : display the current version of equipment...
  • Page 67 Current version of Bootloader: display the current version of equipment 3. 2 Show system [Command] Show system [Function] Display the information of router system [View] All views [Parameter] No [Example] Enter: show system Display the following information: Example: 00:00:38 up 0 min, load average: 0.00, 0.00, 0.00 3.
  • Page 68 [Command] Show log [lines <n>] [Function] Display the log of router system and display the latest 100 logs in default. [View] All views [Parameter] Lines <n> limits the log numbers displayed, wherein, n indicates the latest n logs in case that it is positive integer and indicates the earliest n logs in case that it is negative integer and indicates all the logs in case that it is 0.
  • Page 69 Enter: show startup-config Display the operational configuration of system. 4 Check Network Status Command 4. 1 Show interface [Command] Show interface [Function] Display the information of port state of router [View] All views [Parameter] No [Example] Enter: show interface Display the state of all ports. 4.
  • Page 70 5 Internet Testing Command Router has provided ping , telnet and traceroute for Internet testing. 5. 1 Ping [Command] Ping <hostname> [count <n>] [size <n>] [source <ip>] [Function] Apply ICMP testing for appointed mainframe. [View] All views [Parameter] <hostname> tests the address or domain name of mainframe. count <n>...
  • Page 71 6 Configuration Command In super user view, router can use configure command to switch it over configure view for management. Some setting command can support no and default, wherein, no indicates the setting of canceling some parameter and default indicates the recovery of default setting of some parameter. 6.
  • Page 72 [Example]  Enter in configured view: clock timezone CST -8 The time zone of IG601is east eighth area and the name is CST (China's standard time).  Enter in configured view: default clock timezone Recover the timezone of router to the factory setting. 6.
  • Page 73 [Example] Enter in configured view: config import The config. is imported. 7 System Management Command 7. 1 Reboot [Command] Reboot [Function] System restarts. [View] Super user view and configuration view [Parameter] No [Example] Enter in super user view: reboot System restarts. 7.
  • Page 74 [View] Configure view. [Parameter] No [Example]  Enter in configured view: username abc password 123 Add an ordinary user, the name is abc and the password is 123.  Enter in configured view: no username abc Delete the ordinary user with the name of abc. ...
  • Page 75 FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 76 IC STATEMENT This device complies with Industry Canada license-exempt RSS standard(s): Operation is subject to the following Two conditions: (1) this device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Table of Contents

Save PDF