Page 2
Overview This document is used to guide customer installing and operating InRouter700 Series industrial router which researched and developed by InHand Networks. Please make sure the product model and the accessories in the packaging (like power supply, antenna) before using. If you need buy SIM card, please consult the local operators.
Page 3
Quick Connection to Internet Notice: all the operation should be carried out when InRouter keep interruption of power supply. Step 1: Preparation Insert SIM Card Antenna Installation Connection with PC Power Supply Step 2 First Connect InRouter700 with Your PC InRouter700 can auto-distribute IP address for PC.
Page 4
Step 3: Start to configure your InRouter700 (Optional) After you have finished the former steps, you can configure the InRouter: Open IE browser, input the default IP Change the IP configuration: address of the InRouter: If you want to change the IP address of “http://192.168.2.1”.
Page 5
Reset to Factory Defaults Hardware Method Legend: On-- Off-- Blink-- Press and hold RESET When you see ERROR LED After a few seconds, Then will button while turning turns (about the ERROR LED will ERROR and STATUS LED on IR700. seconds after power on), turn off, now press blink,...
Need help?
Do you have a question about the InRouter700 Series and is the answer not in the manual?
Questions and answers