Playing External Midi Modules Or Keyboards - Gateway Solo 2200 User Manual

User's Guide 47
2. Double-click on an instrument (External MIDI if you're using the wavetable
synthesizer).The "MIDI for External MIDI Port Properties" dialog appears.
3. Click on the "Details" tab.
Figure 44. The Details Tab Window
4. Click on the "Percussion on Channel 16" option and then click on OK.
5. Try playing the sequence again. This time, the percussion instruments
should play correctly.
When you're finished playing this file, be sure to set this control panel option
back to "General MIDI Instrument," or you'll encounter the same problem
when trying to play back a normal MIDI file with percussion instruments on
MIDI channel 10.

Playing external MIDI modules or keyboards

You can use a MIDI sequencer on your Solo 2200 to play through external
MIDI modules or keyboards. To do this, you need one of the optional Solo
Docking Stations that has a MIDI/Game port. You also need a standard MIDI
breakout box that converts the Game port connector to standard 5-pin MIDI
In and Out connectors. The breakout box is not available from Gateway
2000, but can be obtained from various musical instrument retailers.