Vonage VDV21-VD User Manual page 7

LCD Message
Retrieving IP address
Connected to Internet
Retrieving Profile
Connecting to Vonage server
View the Terms of Service by visiting the Vonage website at www.vonage.com/tos. Pay particular attention to
Section 11 which explains limitations on Warranty, Remedy and Liability.
Vonage V-Portal User Guide
Meaning
When you see this message, the V-Portal is connected to the
Internet and is communicating with your Internet Service
Provider (ISP) to obtain information that allows Internet access.
It is not yet connected to the Vonage network so you can not
use the V-Portal to make calls when this message displays.
You will be able to make calls momentarily, as soon as "Ready
to make calls" displays.
All icons are off unless you've plugged a device (such as a
computer or printer) into the Ethernet (LAN) port on the back of
your V-Portal. If the LAN port is connected, the
displays on the LCD status bar.
The display backlight is on and set to High (full brightness).
When you see this message, the V-Portal can successfully
access the Internet. It is not yet connected to the Vonage
network so you can not use the V-Portal to make calls when
this message displays. You will be able to make calls
momentarily, as soon as "Ready to make calls" displays.
The Internet icon
LAN port is connected, the
The display backlight is on and set to High (full brightness).
When you see this message, the V-Portal is automatically
obtaining its configuration file (profile) from the Vonage
Network. The configuration file provides the V-Portal settings
that are necessary for the V-Portal to function properly.
The V-Portal is not yet connected to the Vonage network so you
can not use the V-Portal to make calls when this message
displays. You will be able to make calls momentarily, as soon
as "Ready to make calls" displays.
The Internet icon
is connected, the
The display backlight is on and set to High (full brightness).
When you see this message, the V-Portal has successfully
downloaded its profile from the Vonage Network. It is
connecting to the Vonage Network and, as the connection has
not completed, you can not use the V-Portal to make calls when
this message displays. You will be able to make calls
momentarily, as soon as "Ready to make calls" displays.
displays on the LCD status bar. If the
icon also displays.
displays in the status bar. If the LAN port
icon also displays.
icon
7