Web-Based Configuration And Status User Interface; Introduction To The Web Ui - Vonage VDV21-VD User Manual

Vonage V-Portal User Guide
V-Portal Web-based Configuration and Status User
Interface
For most users, the V-Portal once installed will function properly without adjusting any settings.
You can make phone calls and use it as a router with the default settings. For those times when
you need to make adjustments, or for users with networking knowledge who want to customize
the settings, or if you're a DSL user and need to set up PPPoE, the V-Portal has a Web-based
Configuration and Status User Interface ("Web UI").

Introduction to the Web UI

To access the Web UI of the V-Portal:
From a PC connected directly to the Ethernet port of the V-Portal, open a Web browser, such as
Microsoft's Internet Explorer, and type V-Configure.com in the Address bar. Press the Enter key
on your keyboard.
NOTE: If you are having trouble accessing the Web UI using V-Configure.com, please try
entering 192.168.15.1 in the address bar of your browser.
The Log In page will be displayed.
Enter router in the User Name field.
View the Terms of Service by visiting the Vonage website at www.vonage.com/tos. Pay particular attention to 36
Section 11 which explains limitations on Warranty, Remedy and Liability.