Traffic Control - TP-Link TL-R470T User Manual

Choose the menu Advanced→NAT→ALG to load the following page.
The following items are displayed on this screen:
ALG
FTP ALG:
H.323 ALG:
SIP ALG:
IPsec ALG:
PPTP ALG:

4.5.2 Traffic Control

Traffic Control functions to control the bandwidth by configuring rules for limiting various data flows. In
this way, the network bandwidth can be reasonably distributed and utilized.
4.5.2.1 Setup
Choose the menu Advanced→Traffic Control→Setup to load the following page.
Figure 4-26 ALG
Enable or disable FTP ALG. The default setting is enabled. It is
recommended to keep the default setting if no special
requirement.
Enable or disable H.323 ALG. The default setting is enabled.
H.323 is used for various applications such as NetMeeting and
VoIP.
Enable or disable SIP ALG. The default setting is enabled. It is
recommended to keep the default setting if no special
requirement.
Enable or disable IPsec ALG. The default setting is enabled. It is
recommended to keep default if no special requirement.
Enable or disable PPTP ALG. The default setting is enabled. It is
recommended to keep default if no special requirement.
-56-