TP-Link TL-R470T User Manual page 71

Choose the menu Advanced→Routing→Static Route to load the following page.
The following items are displayed on this screen:
Static Route
Destination:
Subnet Mask:
Next Hop:
Interface:
Metric:
Description:
Status:
List of Rules
You can view the information of the entries and edit them by the Action buttons.
Figure 4-35 Static Route
Enter the destination host the route leads to.
Enter the Subnet Mask of the destination network.
Enter the gateway IP address to which the packet should be sent next.
Select the physical network interface, through which this route is
accessible.
Defines the priority of the route. The smaller the value is, the higher the
priority is. The default value is 0. Keep the default value if unnecessary.
Give a description for the entry.
Activate or inactivate the entry.
-67-