TP-Link TL-R470T User Manual page 34

Account Name:
Password:
Server IP:
MTU:
Active Mode:
Secondary Connection:
Connection Type:
IP Address:
Subnet Mask:
Enter the Account Name provided by your ISP. If you are not
clear, please consult your ISP.
Enter the Password provided by your ISP.
Enter the Server IP provided by your ISP.
MTU (Maximum Transmission Unit) is the maximum data unit
transmitted by the physical network. It can be set in the
range of 576-1460. The default MTU is 1460. You are
recommended to keep the default value if no other MTU
value is provided by your ISP.
You can select the proper Active Mode according to your
need.
Manual: Select this option to manually activate or
terminate the Internet connection by the <Connect> or
<Disconnect> button. It is optimum for the dial-up
connection charged on time.
Always-on: Select this option to keep the connection
always on. The connection can be re-established
automatically when it is down.
Here allows you to configure the secondary connection.
Dynamic IP and Static IP connection types are provided.
Select the secondary connection type. Options include
Disable, Dynamic IP and Static IP.
If Static IP is selected, configure the IP address of WAN port.
If Dynamic IP is selected, the IP address of WAN port
obtained is displayed.
If Static IP is selected, configure the subnet mask of WAN
port. If Dynamic IP is select, the subnet mask of WAN port
obtained is displayed.
-30-