TP-Link TL-R470T User Manual page 108

Destination IP/Domain:
4.8.4.2 Online Detection
On this page, you can detect the WAN port is online or not.
Choose the menu Maintenance→Diagnostics→Online Detection to load the following page.
The following items are displayed on this screen:
General
Port:
Detecting:
Mode:
Ping:
DNS Lookup:
List of WAN status
Enter destination IP address or Domain name here. Then select a
port for testing, if Auto is selected, the Router will select the interface
of destination automatically. After clicking the <Start> button, the
Router will send Tracert packets to test the connectivity of the
gateways during the journey from the source to destination of the
test data and the results will be displayed in the box below.
Figure 4-66 Online Detection
Select the port to be detected.
Activate or inactivate Online Detection function. When Online Detection is
active, WAN status will depend on the result of both PING and DNS
Lookup. When Online Detection is inactive, WAN status will be detected
according to physical connection status and dial-up status.
Detect automatically or Manually. In Auto mode, gateway will be selected
as destination for PING detection, DNS server of WAN port will be
selected as destination for DNS Lookup. In Manual Mode, you can
configure the destination for PING and DNS Lookup manually.
Enter the destination IP for Ping in Manual mode. 0.0.0.0 means PING
detection is disabled.
Enter the IP address of DNS server in Manual mode. 0.0.0.0 means DNS
Lookup is disabled.
-104-