System Diagnosing; Smart Diagnosis (Auto-Detect) - Launch Creader Elite 2.0 BBA Manual

Caution: Don't connect or disconnect any test equipment with ignition on or engine
running.

4.2 System Diagnosing

This function is specially designed to diagnose electronic control systems of
single vehicle model.
*Notes:
1. The diagnostic software of the vehicle includes all kinds of reset software, user can
perform it (select Special function from the diagnostic function list) directly in this
module.
2. All software is updated periodically. It is recommended to update and install the latest
software version for the best service, functions and experience.
• Use and update of the diagnostic software pre-installed on the tool is free of
charge forever.
• Use and update of the diagnostic software purchased on the "Mall" is free of
charge for one year. If it expires, user needs to renew the subscription.
3. More vehicle coverage can be extended on each model. Just go to "Mall" to subscribe
it.

4.2.1 Smart Diagnosis (Auto-Detect)

This function allows you to quickly access the electronic control systems of the
vehicle via decoding the VIN, without manual step-by-step menu selection.
After connection, turn the ignition key on and the system enters auto-detect
mode .
*Notes:
• Make sure the "Automatic detection on connect" in "Settings" is set as ON.
• A highly stable and solid network connection is recommended for successful VIN
access.
A. Once the system successfully obtains the VIN (Vehicle Identification Number)
information of the currently identified vehicle, it will continue scanning the
vehicle systems. After the scanning is complete, a diagnostic report will be
automatically generated in the Settings -> Data -> Diagnostic Report.
B. If the tool failed to access the VIN information, the following screen will
appear:
11
LAUNCH