Launch Creader Elite 2.0 BBA Manual page 2

LAUNCH
Study, understand and follow all instructions provided with this product. Read
these instructions carefully before installing, operating, servicing or repairing
this tool. Keep these instructions in a safe, accessible place.
Caution: To help prevent personal injury,
• Never use this tool for any application other than for which it was
designed.
• Never alter or modify this tool in any way. Improper operation and / or
maintenance of the tool, or modification of the tool could result in serious
injury or death.
• Always perform automotive testing in a safe environment.
• Do not attempt to operate or observe the tool while driving a vehicle.
Operating or observing the tool will cause driver distraction and could
cause a fatal accident.
• Wear safety eye protection that meets ANSI standards.
• Keep clothing, hair, hands, tools, test equipment, etc. away from all
moving or hot engine parts.
• Operate the vehicle in a well-ventilated work area: Exhaust gases are
poisonous.
• Put blocks in front of the drive wheels and never leave the vehicle
unattended while running tests.
• Use extreme caution when working around the ignition coil, distributor
cap, ignition wires and spark plugs. These components create hazardous
voltages when the engine is running.
• Put the transmission in P (for A/T) or N (for M/T), and make sure the
parking brake is engaged.
• Keep a fire extinguisher suitable for gasoline / chemical / electrical fires
nearby.
• Don't connect or disconnect any test equipment while the ignition is on or
the engine is running.
• Keep this tool dry, clean, free from oil / water or grease. Use a mild
detergent on a clean cloth to clean the outside of the tool, when necessary.
WARNING
ii