K-array Kommander-KA User Manual page 25

Manually Connect via Wi-Fi and browser
Go to the Wi-Fi connection settings of your device.
E. Among the available Wi-Fi, select the one whose SSID
starts with K-array followed by the device serial number
(e.g. K-array-K155AP0015)*
F. You will be asked to insert the Wi-Fi password: the default
Wi-Fi password of any K-array device is the device serial
number, case sensitive (e.g. K140AP0107). You can find the
device serial number in the back panel label and in the Wi-Fi
SSID.
G. Once connected, open the web browser in your device
(Google Chrome recommended) and insert the device
default Wi-Fi IP:
If the amplifiers are connected to the same network via an
access point, K-array Connect enables the recognition, access,
and configuration of all amplifiers on the network. Another
method for accessing the amplifier is through the built-in web
app, which can be reached via a browser. This web app offers
a more complex interface with dedicated functionalities, which
will be covered in the next chapter.
*KA04 serial-number *KA04 serial-number
Kommander-KA
User Guide
25