Technical Specifications - EdgeStar IP201SS Owner's Manual

The unit Is Bad with
distilled water- or some
other type of water with no
impurities.
Add a s«e bit o( salt to the water or
use water from a different source
(tap water or boned drinking water
is best).
The "lee Full" Indicator
la on:
s
The Ice basket Is fui. Remove ice from the ice basket
The caution Icon la
displayed:
The Ice shovel cannot
move.
Check* the ice la blocking the kce
pusher, otherwise, consult service.
The caution Icon le
displayed, flashing:
There Is a problem with
the Ice maker's sensors
Consult a quashed technician.
The Ice cubes stick
together.
The kce cycle Is too long
Stop the ice maker, and restart R
when the ice blocks meft. Select the
smal ice button
The water temperature In
the inner tank is km low.
Change the water In the inner tank.
The ideal water temperature Is
45*-WTF
The compressor makes
a loud buzzing noise
The unit is being run oh
the wrong voltage or
frequency.
Plug the irtt Into a 110120 Vo*. 60
Hertz power source.
Contact the shipper.
The unit doee nothing
Power is not supplied to
the unit.
Plug the unit into a 11CV120 VoR. 60
Hertz power source.
The Ice making cycle
seems normal but no Ice
The ambient temperature
or the water temperature
is loo high.
Please run the Ice maker In
temperatures below 90'F and/or
pour colder water into tank.
la produced.
Refrigerant leakage. Consult a qualified technician.
A pipe In the cooling
system Is blocked.
Consult a qualified technician.
TECHNICAL SPECIFICATIONS
Model
Prcaecbon Type
Power
Rated Current
nfTTigifirw
Nat Weight
Stze(HXWXD)
IP201SS
I
110V-120V/60HZ
2.4-3.5 A
R134a/130g
*5.7 Lb
171r\X15lnX171r
9 10