Download Print this page

Troubleshooting Guide - Inkbird IHC-200 Quick Start Manual

Plug and play humidity controller
Hide thumbs Also See for IHC-200:

Advertisement

8. Troubleshooting Guide

Issues Causes
The
1. Water or
condensation
probe
enters the
reading
probe.
is
2. The probe is
incor-
placed in a
rect.
area with poor
humidity
circulation.
3. The probe is
damaged.
work1
1. Incorrect
output
settings.
will not
2. Incompatible
turn on.
humidifier.
3. Output
malfunction.
work2
1. Incorrect
output
settings.
will not
2. Incompatible
turn on.
dehumidifier.
3. Output
malfunction.
Solutions
1. Adjust the position of the probe.
2. Use a dry cloth to clean.
3. If the probe is used in a high humidity
environment, dry it using a hairdryer and
then test it at room.
4. Check if the probe is intact.
5. If the deviation is small, use the CA
function to calibrate.
1. Verify that the settings are correct.
2. The humidifier power is within the
range of 100-240V, 10A. The humidifier
can automatically turn on when plugged
in. The humidifier does not have a built-in
humidity control, or the built-in humidity
control does not affect the IHC-200
control.
3. There is no problem with 1&2,please:
· Unplug the controller.
· Press and hold the "SET" button.
· Plug the controller to power on, then
release the "SET" button
· Quickly press the "
press the "
" button). The "work1"
indicator and output should activate.
If the humidifier still does not work,
please contact customer service.
1. Verify that the settings are correct.
2. The dehumidifier power is within the
range of 100-240V, 10A. The dehumidifier
can automatically turn on after power is
connected. The dehumidifier does not
have a built-in humidity control, or the
built-in humidity control does not affect
the ITC-308 control.
3. There is no problem with 1&2, please:
· Unplug the controller.
· Press and hold the "SET" button.
· Plug the controller to power on, then
release the "SET" button
· Quickly press the "
press the "
" button). The "work2"
indicator and output should activate.
If the dehumidifier still does not work,
please contact customer service.
8
" button ( do not
" button ( do not

Advertisement

loading
Need help?

Need help?

Do you have a question about the IHC-200 and is the answer not in the manual?

Questions and answers