Error Message Table - Casio FX-9860G MANAGER PLUS User Manual

11. Error Message Table

k fx-9860G Manager PLUS
Message
An error occurred while
reading the file <file name>.
The file may be corrupted.
There is no more playable
data.
You cannot delete all Key-
Log records.
Before deleting the selected
record, first add a new
record.
This application cannot run
on this computer's operating
system.
<file name>
This file is read-only.
Use a different file name.
A problem occurred while
adding a Key-Log record.
After confirming there is
enough memory capacity to
store the record, try again.
A problem occurred while
accessing the registry.
Make sure that you are logged
on with administrator
privileges.
A problem occurred while
writing to the file <file name>
because not enough disk
space is available.
Check the remaining capacity
of your disk and try again.
This application cannot be
started up because the DLL
version is wrong.
This may be due to a problem
during installation.
Re-install the application.
Description
Wrong file format.
There are no playable keys to
the right of the input cursor.
You are trying to delete all
Key-Log records, which is not
allowed.
You are trying to run the
application under an operating
system that is not supported.
You are trying to save a read-
only Key-Log file after editing
or recording to it.
Some problem occurred while
adding a Key-Log record.
A registry access error
occurred.
There is not enough disk
space available to save the file.
Your computer has the wrong
DLL version.
E-43
Required Action
Check the file to see if it is
corrupted.
Move the input cursor to the
left of the keys you want to
play back, and perform the
play operation.
To delete all of the current
records, first add a different
record. At least one Key-Log
record must be remaining in
memory.
Run the application on a
computer that is using a
supported operating system.
Save the Key-Log file under a
different file name.
Make sure there is enough
free memory remaining to
complete the operation and try
again.
Make sure that you are logged
on with administrator
privileges.
Make sure there is enough free
memory available and try
again.
Installation may have failed, so
re-install the application.