Casio FX-9860G MANAGER PLUS User Manual page 49

Message
The image could not be sent
from the calculator.
(1) Try pressing a key on the
calculator.
(2) Check to make sure that
the calculator is in the OHP
Mode.
If the screen is not sent after
you perform the above steps,
disconnect the USB cable and
check the calculator setup.
Next, reconnect and try again.
For details, select the following
on the menu bar: Help -
Manual - Manager PLUS, or
refer to the Manager PLUS
user's guide.
The connection has been
broken for some reason and is
being restored.
If data communication does
not resume after some time,
perform the operation
described below.
Try pressing a key on the
calculator. If the screen is not
sent after you perform the
above steps, disconnect the
USB cable and check the
calculator setup. Next,
reconnect and try again.
For details, select the following
on the menu bar:
Help - Manual - Manager
PLUS, or refer to the Manager
PLUS user's guide.
Description
The calculator screen image
cannot be sent for some
reason.
—
E-47
Required Action
Follow the steps that are
shown on the display and try
again.
See "10. Using Screen
Receiver to Display the
Calculator Screen Image on
Your Computer" for details.
Follow the steps that are
shown on the display and try
again.