Error Message Table - Casio fx-CG10 User Manual

11. Error Message Table

Message
An error occurred while reading
the file <file name>. The file
may be corrupted.
There is no more playable
data.
You cannot delete all Key- Log
records.
Before deleting the selected
record, first add a new record.
<file name>
This file is read-only.
Use a different file name.
A problem occurred while
adding a Key-Log record.
After confirming there is
enough memory capacity to
store the record, try again.
A problem occurred while
writing to the file <file name>
because not enough disk
space is available.
Check the remaining capacity
of your disk and try again.
This application cannot be
started up because the DLL
version is wrong.
This may be due to a problem
during installation.
Re-install the application.
A problem occurred while
reading file <file name>.
The disk being read from may
be damaged or may not exist.
Check the disk and try again.
A problem occurred while
writing file <file name>.
The disk being written to may
be damaged or may not exist.
Check the disk and try again.
A problem occurred while
reading file <file name>.
The file may have been moved
or deleted.
Description
Wrong file format.
There are no playable keys to
the right of the input cursor.
You are trying to delete all
Key-Log records, which is not
allowed.
You are trying to save a read-
only Key-Log file after editing
or recording to it.
Some problem occurred while
adding a Key-Log record.
There is not enough disk space
available to save the file.
Your computer has the wrong
DLL version.
A problem occurred while
reading from a disk.
A problem occurred while
writing to a disk.
A problem occurred when you
tried opening a file from the list
of previously opened files on
the File menu.
E-49
Required Action
Check the file to see if it is
corrupted.
Move the input cursor to the
left of the keys you want to
play back, and perform the
play operation.
To delete all of the current
records, first add a different
record. At least one Key-Log
record must be remaining in
memory.
Save the Key-Log file under a
different file name.
Make sure there is enough free
memory remaining to complete
the operation and try again.
Make sure there is enough
free memory available and try
again.
Installation may have failed, so
re-install the application.
Check the disk for data
corruption and confirm that the
disk exists. Then try again.
Check the disk for data
corruption and confirm that the
disk exists. Then try again.
Check to see if the file has
been moved or deleted.