Shutdown And Startup Problems - Fujitsu Lifebook T730 User Manual

Problem
Your Tablet PC will not
work on battery alone.
(continued)
The battery seems to 
discharge too quickly.

Shutdown and Startup Problems

The Suspend/Resume 
button does not work.
The system powers up
and displays power on
information, but fails to
load the operating system.
Possible Cause
Your installed battery is faulty.
The power savings features
may be disabled.
You're running an application
that uses a lot of power due to
frequent optical drive access,
or use of a LAN ExpressCard,
WLAN, or Bluetooth device.
The brightness is turned all
the way up.
The battery is very old.
The battery was exposed to
high temperatures.
The battery is too hot or too
cold.
Suspend/Resume 
button is disabled.
There may be application
software. conflict
You have a secured system
requiring a password to load
your operating system.
113 - Troubleshooting
Possible Solutions
Verify the condition of the battery using the Status Indicator
panel and replace or remove any batteries that are shorted.
See "Status Indicator Panel" on page 30.
Check the Power Options menu settings and adjust accord-
ing to your operating needs.
Use a power adapter for this application when at all possible.
Turn down the brightness adjustment. The higher the bright-
ness the more power your display uses.
Replace the battery.
Replace the battery.
Restore the Tablet PC to normal operating temperature.
Charging icon on the Status Indicator panel will flash when
battery is outside of operating range.
To enable the button, go to the Control Panel -> Power
Options and click on the Advanced tab. In the Power buttons
area, select the "Change what the power button does" option.
Close all applications and try the button again.
Make sure you have the right password. Enter the setup util-
ity and verify the Security settings and modify them as
accordingly. See "BIOS Setup Utility" on page 72.