Fujitsu LIFEBOOK T734 Operating Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Laptop
  5. LIFEBOOK T734
  6. Operating manual

Fujitsu LIFEBOOK T734 Operating Manual

Lifebook t734
Hide thumbs Also See for LIFEBOOK T734:
Table of Contents

Advertisement

Quick Links

See also: Operating Manual
System
Operating manual
FUJITSU LIFEBOOK T734

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu LIFEBOOK T734

Summary of Contents for Fujitsu LIFEBOOK T734

  • Page 1 System Operating manual FUJITSU LIFEBOOK T734...
  • Page 2 You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
  • Page 4 Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions 2013. All rights reserved. Publication Date 11/2013 Order No.: A26391-K397-Z320-1-7619, edition 1...
  • Page 5 FUJITSU LIFEBOOK T734 Operating manual Innovative technology Ports and controls Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility Troubleshooting and tips Technical data Manufacturer’s notes...
  • Page 6 Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.

  • Page 7: Table Of Contents

    Battery charge status indicator ............49 Fujitsu...
  • Page 8 Connecting an external monitor to the DisplayPort ........77 Fujitsu...
  • Page 9 Technical data ............... . . 98 Fujitsu...
  • Page 10 Index ................. . 108 Fujitsu...

  • Page 11: Innovative Technology

    The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used.

  • Page 12: Notational Conventions

    "Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:...

  • Page 13: Ports And Controls

    14 = Loudspeakers 6 = Status indicators 15 = Microphone jack 7 = Windows button 16 = Headphone port 8 = Tablet buttons 17 = Memory card slot 9 = ON/OFF switch 18 = ON/OFF switch for wireless components Fujitsu...
  • Page 14 1 = DC input connector (DC IN) 3 = USB port with charging function (Anytime USB charge, USB 3.0) 2 = HDMI port Rear 1 = Security Lock device 3 = USB ports (USB 2.0) 2 = VGA monitor port 4 = LAN port Fujitsu...
  • Page 15 5 = Battery charge status indicator 2 = Memory service compartment 6 = Port for port replicator 3 = Attachment eye for the pen cord 7 = Ventilation slot cover 4 = Battery with SIM card slot under the battery Fujitsu...

  • Page 16: Important Notes

    (e.g. petrol station, paintshops), as the transmitted radio waves can cause an explosion or a fire. For information on how to switch radio components on and off, see chapter "Switching the wireless components on and off", Page Fujitsu...

  • Page 17: Energy Saving

    ► Enquire with the corresponding government office of the country you will be travelling in as to whether you may operate the radio component integrated in your notebook there (see also "CE marking", Page 102). Fujitsu...

  • Page 18: Notebook: Transporting

    The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. To clean the keyboard and the touchpad, if available, you can use disinfectant wipes. Ensure that no liquid enters the device. Fujitsu...

  • Page 19: First-Time Setup Of Your Device

    ► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu...

  • Page 20: Selecting A Location

    ► Connect the power cable (1) to the mains adapter. ► Plug the mains cable (2) into a mains outlet. ► Connect the mains adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu...

  • Page 21: Switching On The Device For The First Time

    If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet under "http://www.fujitsu.com/fts/support/". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com".

  • Page 22: Working With The Notebook

    Please refer to the notes in "Important notes", Page Status indicators Statusindicators Symbols The status indicators provide information about the status of the power supply, the drives and the keyboard functions etc. Fujitsu...
  • Page 23 Scroll Lock indicator Indicator is lit: The key combination has been pressed. The effect that this key has varies between applications. Lock Workstation indicator The indicator is illuminated: The security functions of the Notebook have locked your workstation. Fujitsu...

  • Page 24: Opening The Notebook

    Working with the notebook Opening the notebook ► Open the LCD screen. Fujitsu...

  • Page 25: Switching On The Notebook

    Windows 8.1 Desktop - Control Panel - Hardware and Sound - Power Options If you have assigned a password, you must enter this when requested to do so, in order to start the operating system. Detailed information can be found in the chapter "Security functions", Page Fujitsu...

  • Page 26: Different Ways To Use Your Notebook

    You must note that the display cannot be turned completely on its own axis! From notebook to Tablet PC ► Raise the LCD display into a vertical position. Fujitsu...
  • Page 27 ► Hold the screen as low as possible on both sides. Turn the screen to the left or right in the direction of the arrow. At first you will feel some slight resistance, then it will turn easily and without friction. ► Turn the display further until it has turned 180° and the hinge latches in. Fujitsu...

  • Page 28: Select Display Orientation (Portrait Or Landscape Orientation)

    Windows 7 You can change these settings in the Fujitsu menu or under Start - (Settings -) Control Panel - Hardware and Sound - Display - Settings. Windows 8.1 You can change these settings under Windows 8.1 Desktop - Control Panel -...

  • Page 29: From Tablet Pc To Notebook

    Working with the notebook From Tablet PC to notebook ► Raise the LCD screen into a vertical position. Fujitsu...

  • Page 30: Switching Off The Notebook

    Switching off the notebook Notebook ► Close all applications and then shut down the operating system (please see the "Operating System Manual"). ► Slide the ON/OFF switch towards the right. The ON/OFF switch returns automatically to its original position. Fujitsu...

  • Page 31: Closing The Notebook

    Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish, Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian. Under Windows 8.1 you can set the required language under Control Panel – Time, Language and Region – Language. Fujitsu...

  • Page 32: Lcd Screen

    LCD screen LCDscreen Notes Fujitsu notebooks have high-quality LCD monitors (TFT). For technical reasons, these monitors are manufactured for a specific resolution. An optimal, clear picture can only be ensured with the resolution intended for the relevant monitor. A resolution which differs from the specification can result in an unclear picture.

  • Page 33: Using A Device As A Tablet Pc

    Tablet PC Settings. ► Ensure that the monitor displayed in the Display field is the same as the monitor that you wish to calibrate. ► Tap or click on Calibrate and follow the instructions on the screen. Fujitsu...
  • Page 34 ► Touch the desired item once with your finger mouse button) tip. Keep the finger tip pressed against the touchscreen. The context menu appears. Moving the cursor ► Position one finger on the touchscreen and move the finger in the desired direction. Fujitsu...
  • Page 35 Working with the notebook Actions with two fingers Action Description Scrolling ► Position two fingers on the touchscreen. ► Move your fingers upwards to scroll up. ► Move your fingers downwards to scroll down. Fujitsu...
  • Page 36 Working with the notebook Action Description Rotating ► Position the thumb on the touchscreen, then turn the picture clockwise or counter-clockwise using your index finger. Fujitsu...
  • Page 37 ► Position two fingers on the touchscreen and move them apart to increase the view. ► Position two fingers on the touchscreen and move them together to decrease the view. Blocking context-sensitive menus ► With two fingers, tap twice briefly in quick succession on the touchscreen. Fujitsu...

  • Page 38: Using The Stylus Pen

    Replace the stylus tip if it is worn. The warranty does not cover a scratched screen. While writing, you should take care not to scratch the surface of the display (e.g. with a wristwatch or bracelet). Fujitsu...
  • Page 39 (assignment and function of the pen button). Windows 8.1 Under Windows 8.1 Desktop - Control Panel - Hardware and Sound - Pen and Touch you can make various settings for the pen (assignment and function of the pen button). Fujitsu...

  • Page 40: Calibrating The Pen

    You should attach the pen with a pen cord to prevent accidentally dropping or losing it. ► Attach the end of the pen cord with the smaller loop to your pen. ► Attach the end of the pen cord with the larger loop to your notebook. Fujitsu...

  • Page 41: Using The Device As A Notebook

    ► Tap the touchpad once or press the left button once. The item is selected. Executing commands ► Move the pointer to the field you wish to select. Touchpad ► Tap the touchpad twice or press the left button twice. The command is executed. Fujitsu...
  • Page 42 ► Press and hold the left button and, with your finger on the touchpad, drag the item to the desired position. The item will be moved. Switching the Touchpad on and off You can switch the Touchpad on and off using a key combination, "Key combinations", Page Fujitsu...

  • Page 43: Keyboard

    The figure below shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device. Alt Gr Fujitsu...
  • Page 44 The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor controlkeys Windows key The Windows key switches between the start screen and the last used application. Windowskey Menu key The Menu key opens the menu for the active application. Fujitsu...

  • Page 45: Virtual Numeric Keypad

    Key combinations are entered as follows: ► Press the first key in the combination and keep it pressed. ► While holding the first key down, press the other key or keys in the combination. Fujitsu...
  • Page 46 (analogue) • at the same time on the notebook’s LCD screen and on the external monitor (analogue) You cannot use the key combination to switch output at the same time to both external monitors on the Port Replicator. Fujitsu...

  • Page 47: Tablet Buttons

    The tablet buttons have different uses in different modes. In addition, you can still individually program some of the tablet buttons, "Programming the tablet buttons", Page Fujitsu...

  • Page 48: Programming The Tablet Buttons

    Windows 7: This button locks and unlocks the automatic rotation of the display. Button "A" This button starts the Fujitsu Menu application. You can use this application to change certain system settings. The button is freely programmable. Button "B"...

  • Page 49: Webcam

    If you would like to perform a function test of your web cam, there is suitable test software available at "http://www.fujitsu.com/fts/support/index.html". Fujitsu...

  • Page 50: Rechargeable Battery

    To be able to make use of the optimal charging capacity of the batteries, the battery should be completely discharged and then fully recharged. If you do not use the batteries for long periods, remove them from the notebook. Never store the batteries in the device. Fujitsu...

  • Page 51: Removing And Installing The Battery

    Working with the notebook Removing and installing the battery Only use batteries approved by Fujitsu for your notebook. Never use force when fitting or removing a battery. Make sure that no foreign bodies get into the battery connections. Never store a battery for long periods in the discharged state. This can make it impossible to recharge.
  • Page 52 ► Place the battery on the lower edge of the battery compartment (1). ► Slide the battery into the battery compartment until you feel it engage (2). ► Slide the release button into its locked position (3). ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu...

  • Page 53: Battery Charge Status Indicator

    The battery is between 50 % and 100 % charged. Orange The battery is between 11 % and 49 % charged. The battery is between 1 % and 10 % charged. LED not lit The battery is fully discharged. Fujitsu...

  • Page 54: Module

    The module can now be removed without any further actions being necessary. Removing a module Module Drive WeightSaver ► Slide the release lever in the direction of the arrow (1). ► Now pull the module out of the module bay (2). Fujitsu...

  • Page 55: Installing A Module

    Avoid storing a data carrier in areas subject to high temperatures or humidity. You can use data carriers with a diameter of 8 cm / 3.15" or 12 cm / 4.7" in the drive. When using a data carrier of lesser quality, vibrations and reading errors may occur. Fujitsu...

  • Page 56: Cd/Dvd Indicator

    ► Gently pull the drive tray (2) completely out. ► Place the data carrier in the drive tray with the printed side facing upwards. ► Remove a data carrier that has been inserted. ► Push in the drive tray until you feel it lock into place. Fujitsu...

  • Page 57: Manual Removal (Emergency Removal)

    ► Prepare for removal, see chapter "Preparing to remove components", Page ► Press and hold the lock of the ventilation slot cover (1) and remove it from its slot (2). ► Clean the dust chamber. Fujitsu...
  • Page 58 Working with the notebook ► Insert the ventilation slot cover into the slot (1) at an angle as shown, and ensure that you feel it click into place. ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu...

  • Page 59: Using The Power-Management Features

    If you do not intend to use your notebook for a long period of time: ► Exit power saving mode if necessary via the mouse or keyboard or by switching on the notebook. ► Close all opened programs and completely shut down the notebook. Fujitsu...

  • Page 60: Memory Cards

    (see the documentation for your operating system). ► On devices with card locking: Press on the storage card (1). Memory card The storage card is released and can now be removed. ► Pull the storage card out of the slot (2). Fujitsu...

  • Page 61: Expresscards

    ► Gently push the card into the slot until you feel it click into place. Do not use any force. Depending on the particular type used, the card may protrude slightly from the slot. Please see the documentation relating to the card for driver installation instructions. Fujitsu...

  • Page 62: Removing The Card

    If you attach an external microphone, the built-in microphone is disabled. When you connect headphones or external speakers, the built-in speakers are disabled. Information on connecting headphones and a microphone can be found "Connecting external devices", Page Fujitsu...

  • Page 63: Sim Card

    ► Press on the edge of the SIM card so that it jumps up slightly out of the slot. ► Pull the SIM card out of the slot in the direction of the arrow (1). ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu...

  • Page 64: Optional Wireless Lan / Bluetooth / Umts / Lte Wireless Components

    Working with the notebook Optional Wireless LAN / Bluetooth / UMTS / LTE wireless components The installation of radio components not approved by Fujitsu will invalidate the certifications issued for this device. Depending on the device configuration you ordered, your device will be equipped with Wireless LAN, Bluetooth, UMTS or LTE.

  • Page 65: Setting Up Wlan Access

    If you did not order a UMTS / LTE module, you can purchase the accessories for UMTS / LTE reception from your retailer or your Fujitsu Technology Solutions dealer. You will find information on establishing the connection with the UMTS / LTE network in the documentation for the hardware used.

  • Page 66: Ethernet And Lan

    ► Connect the network cable to your network connection (2). Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Fujitsu...

  • Page 67: Your Port Replicator (Optional)

    10 = Adjusting lever of the Port Replicator 4 = DisplayPort 11 = Unlocking lever 5 = VGA monitor port 12 = Connector on the Port Replicator for the docking port on the bottom of the notebook 6 = LAN port 7 = Headphone port Fujitsu...

  • Page 68: Setting Up The Port Replicator

    • Never place the port replicator and the mains adapter on a heat-sensitive surface. • Do not expose the port replicator to extreme environmental conditions. Protect the port replicator from dust, humidity and heat. Fujitsu...

  • Page 69: Connect The Notebook To The Port Replicator

    ► Press down on the notebook’s rear corners so that it locks into position. ► Connect the mains adapter cable to the DC jack (DC IN) of the port replicator (1). ► Connect the power cable to the mains adapter (2). ► Plug the power cable into the mains socket (3). Fujitsu...

  • Page 70: Switching On The Notebook Via The Port Replicator

    If the notebook cannot be shut down properly, press the ON/OFF button on the Port Replicator for approx. four seconds. The notebook will switch off. Any unsaved data may however be lost. Fujitsu...

  • Page 71: Disconnecting The Notebook From The Port Replicator

    Problems may occur if the notebook is removed from the port replicator during operation. We recommend that you switch off the notebook beforehand or use the Windows function Start (arrow icon) – Undock. ► Pull the release button in the direction of the arrow (1). ► Pick up the notebook (2). Fujitsu...

  • Page 72: Security Functions

    Brief overview of security functions Detailed information about the security equipment of your device can be found in the "Professional Notebook" manual, on the "Drivers & Utilities" CD/DVD or on the Internet at "http://www.fujitsu.com/fts/support/index.html". Preparation Security functions Type of protection...

  • Page 73: Configuring The Fingerprint Sensor

    Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu recommends the use of a combination lock. ► Fit the Kensington Lock Cable on the device on your notebook.

  • Page 74: Configuring Password Protection In Bios Setup Utility

    The notebook is then rebooted and the new password comes into effect. It will now be necessary to first enter your supervisor or user HDD password in order to open the BIOS Setup Utility. Please note that the user HDD password only provides access to a few of the BIOS settings. Fujitsu...

  • Page 75: Password Protection For Booting Of The Operating System

    ► Select the Disabled option and press the Enter key. If you do not want to change any other settings, you can exit BIOS Setup Utility. ► Select the Save Changes & Exit option under Exit. The notebook will reboot. The system is no longer password-protected. Fujitsu...

  • Page 76: Password Protection For The Hard Disk

    ► To cancel the password for the second hard disk (Drive1), go to the Drive1 area and select the field Set Master Password, then proceed in exactly the same way as for cancelling the password for the first hard disk (Drive0). Fujitsu...

  • Page 77: Using The Security Function Of The Tablet Keys

    Setting the Supervisor password ► Select Start - Run. ► Enter the following at the command line: C:\Program Files\Fujitsu\Security Panel Application\Supervisor\FJSECS.EXE. ► Confirm with Enter ►...

  • Page 78: Trusted Platform Module (Tpm) (Device-Dependent)

    ► Mark the TPM Security Chip Setting field and press the Enter key. ► Select Disabled to deactivate the TPM. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. Your notebook will now restart and TPM will be disabled. Fujitsu...

  • Page 79: Connecting External Devices

    Peripheraldevices Disconnecting devices from the notebook 1. Turn off your notebook and all external devices. 2. Unplug your notebook and all devices from the mains sockets. 3. Disconnect the cables for your external devices following the instructions. Devices Peripheraldevices Fujitsu...

  • Page 80: Connecting An External Monitor

    ► First switch on the external monitor and then the notebook. You can also switch back and forth between the external monitor and the notebook’s LCD monitor, see chapter "Key combinations", Page You can display the same picture on the external monitor and the notebook LCD screen simultaneously. Fujitsu...

  • Page 81: Connecting An External Monitor To The Displayport

    The HDMI port on your notebook can be used to connect an external amplifier, LCD TV or a plasma TV with an HDMI connection. ► Connect the data cable to the external device. ► Connect the data cable to the HDMI port of the notebook. Fujitsu...

  • Page 82: Connecting Usb Devices

    Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognised and installed by your operating system. Fujitsu...

  • Page 83: Usb Port With Charging Function (Anytime Usb Charge)

    ► Left click on the icon to safely remove hardware, located in the taskbar. ► Select the device which you want to shut down and remove. ► Press the Enter key. Wait for the dialogue box which tells you that it is now safe to remove the device. Fujitsu...

  • Page 84: Connecting External Audio Devices

    If you purchase a cable from a retailer, please note the following information: The headphone port on your notebook is a "3.5 mm jack socket". If you want to connect headphones or a speaker you will need a "3.5 mm jack plug". Fujitsu...

  • Page 85: Removing And Installing Components During Servicing

    The equipment and tools you use must be free of static charges. • Remove the power plug from the mains supply before inserting or removing boards containing ESDs. • Always hold boards with ESDs by their edges. • Never touch pins or conductors on boards fitted with ESDs. Fujitsu...

  • Page 86: Preparing To Remove Components

    Otherwise, there is a risk of suffering burns! As some components are exposed that are sensitive to static electricity, please take note of chapter "Notes on installing and removing boards and components", Page Fujitsu...

  • Page 87: Removing A Cover

    ► Pull off the cover from the notebook in the direction of the arrow (2). Removing memory modules ► Carefully push the two mounting clips outwards (1). Memory expansion Memory module The memory module snaps upwards (2). ► Pull the memory module out of its slot in the direction of the arrow (3). Fujitsu...

  • Page 88: Installing A Memory Module

    ► Fasten the cover with the screw (2). ► Install the battery again (see "Removing and installing the battery", Page 47). ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the cables that were previously disconnected. Fujitsu...

  • Page 89: Removing And Installing The Hard Disk

    If you install the wrong screws, components may be damaged. ► Slide the cover in direction of the arrow (2). ► Lift the cover off the notebook (3). Fujitsu...

  • Page 90: Removing A Hard Disk

    Removing and installing components during servicing Removing a hard disk ► To release the hard disk from the contacts, pull it in the direction of the arrow (1). ► Remove the hard disk from the hard disk compartment (2). Fujitsu...

  • Page 91: Installing A Hard Disk

    Removing and installing components during servicing Installing a hard disk ► Place the hard disk into the hard disk compartment (1). ► Push the hard disk in the direction of the arrow (2) until the contacts of the hard disk engage. Fujitsu...

  • Page 92: Attaching The Cover

    ► Install the battery again (see "Inserting battery", Page 48). ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the cables that you disconnected before. Fujitsu...

  • Page 93: Settings In Bios Setup Utility

    ► Select the option you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu...

  • Page 94: Exiting Bios Setup Utility

    ► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...

  • Page 95: Troubleshooting And Tips

    PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"...

  • Page 96: The Notebook's Date Or Time Is Incorrect

    The notebook’s LCD screen remains blank LCDscreen LCDscreenistoodark Cause Troubleshooting Monitor is switched off. ► Press a key or touch the touchpad. External monitor or television set connected. ► Press the key combination to switch the screen output, see "Key combinations", Page Fujitsu...

  • Page 97: The Lcd Screen Is Difficult To Read

    Change the following setting: ► Set the screen resolution: Set the screen resolution as described in the documentation for your operating system. ► Select monitor: Select monitor 1 or 2 as described in the documentation for your operating system. Fujitsu...

  • Page 98: The Cursor Does Not Correctly Follow The Pen Movements

    ► Charge the battery. ► Insert a charged battery. ► Connect the mains adapter to the notebook. The power adapter is not connected correctly. ► Check whether the mains adapter is connected correctly to the notebook. ► Switch the notebook on. Fujitsu...

  • Page 99: The Notebook Stops Working

    The wireless component is enabled. Despite ► Check whether the radio connection is this, the wireless connection to a network does switched on via the software. not work. ► Further information on using the radio component can be found in the help files. Fujitsu...

  • Page 100: The Battery Discharges Too Quickly

    The system configuration information is ► Press the function key to access the incorrect. BIOS Setup. ► In the BIOS Setup, select the Exit menu. ► Select the entry Load Setup Defaults. ► Select OK and press the Enter key. Fujitsu...
  • Page 101 System battery is dead - Replace and run SETUP service centre. ► Contact your sales outlet or our customer System cache error - Cache disabled service centre. ► Contact your sales outlet or our customer System timer error service centre. Fujitsu...

  • Page 102: Technical Data

    315.6 mm x 233 mm x 37.5-33.5 mm / /19.99 in x 14.76 in x 1.48–1.32 inch with rubber feet Weight depending on configuration from 1.8 kg / 3.97 lbs Input devices Keyboard 85 buttons, splash-protected Touchpad 2 keys Fujitsu...
  • Page 103 (Anytime USB charge), 2 x USB 2.0) Security Lock Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature 5℃ ..35℃ / 41°F ..95°F Transport temperature (2K2) –15°C ..60°C / 5°F ..140°F Fujitsu...

  • Page 104: Port Replicator (Optional)

    Rechargeable battery You will find information on the batteries used in your device on the Internet at "http://www.fujitsu.com/fts/support/". In addition to the main battery, you can order an optional battery which is inserted in the module slot. All rechargeable batteries are 6-cell batteries.

  • Page 105: Mains Adapter For Use With The Notebook And Port Replicator

    50 Hz to 60 Hz (automatic) Max. rated current 0.7 A to 1.2 A Secondary Nominal power 80 W Rated voltage 19 V Max. rated current 4.22 A An additional mains adapter or power cable can be ordered at any time. Fujitsu...

  • Page 106: Manufacturer's Notes

    Declarationofconformity The "Declarations of Conformity" for the device can be found on the Internet at: "http://globalsp.ts.fujitsu.com/sites/certificates/default.aspx". Fujitsu Technology Solutions hereby declares that your device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. CE marking...

  • Page 107: Regulatory Notices

    Federal Communications Commission (FCC) of the USA. Although it is not explicitly forbidden to travel in the US trading area carrying this device, to avoid trouble at customs clearance, Fujitsu Technology Solutions GmbH recommends not to bring this device into the US trading area.

  • Page 108: Doc (Industry Canada) Notices

    The user should be aware that compliance with the certification standards does not prevent service degradation in some situations. Repairs to telecommunication equipment should be made by a Canadian authorised maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or Fujitsu...
  • Page 109 Les réparations de l’équipement de télécommunications doivent être effectuées par un service de maintenance agréé au Canada. Toute réparation ou modification, qui n’est pas expressément approuvée par Fujitsu, ou toute défaillance de l’équipement peut entraîner la compagnie de télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique.

  • Page 110: Fcc Regulatory Information For Notebooks With Radio Device

    Please note the following regulatory information related to the optional radio device. FCC Radio Frequency Exposure statement This radio device has been evaluated under FCC Bulletin OET 65C and found compliant with the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Fujitsu...
  • Page 111 (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorised by Fujitsu Technology Solutions may invalidate the user’s right to operate this equipment. Fujitsu...

  • Page 112: Index

    Fn+F10 42 Components Fn+F3 42 installing / removing 81 Fn+F4 42 Configuration, BIOS Setup Utility 89 Fn+F6 42 Connecting audio devices 80 Fn+F7 42 Connecting headphones 80 Fn+F8 42 Crystal View display Fn+F9 42 cleaning 14 Cursor control keys 40 Fujitsu...
  • Page 113 Operating system Manual removal of data carrier 53 activating system protection 71 Mechanical backup 69 cancel system protection 71 Memory card protecting with password 71 handling 56 Optical drive 51 inserting 56 removing 56 Memory expansion installing 84 Packaging 15 Fujitsu...
  • Page 114 42 Transportation 13–14 Screen port Travel, notebook 13 see VGA connection socket 76 Troubleshooting 91 Security functions 68 Trusted Platform Module 74 Security Lock 69 Selecting a location 16 Self-discharge, battery 46 Servicing 81 UMTS 61 Setup Antenna 61 Fujitsu...
  • Page 115 71 Removing 50 Using the Kensington Lock Cable 69 Windows key 40 Wireless LAN Switching off module 60 VGA connection socket 76 Switching on module 60 Virtual numeric keypad 41 Wireless LAN: Volume safety notes 12 decrease 42 Fujitsu...

Table of Contents