Removing A Memory Upgrade Module - Fujitsu Lifebook T580 User Manual

Tablet pc
Hide thumbs Also See for Lifebook T580:
Table of Contents

Advertisement

Available languages

Available languages

Memory Compartment Screw
Figure 34. Opening Memory Compartment
7
Insert the memory upgrade module at a 45° angle. Press the connector edge of the module firmly down and
into the connector until it lodges under the retaining clip. You'll hear a click when it is properly in place.
8
Replace the cover and reinstall the screw.
T
HE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR
PC. O
NCE IT IS INSTALLED
MEMORY CAPACITY

Removing a Memory Upgrade Module

1
Perform steps 1 through 4 of Installing a Memory Upgrade Module.
2
Pull the clips sideways away from each side of the memory upgrade module at the same time.
3
While holding the clips out, remove the module by lifting it up and pulling it away from your Tablet PC.
4
Store the memory upgrade module in a static guarded sleeve.
5
Replace the cover and reinstall the screw.
Figure 35. Installing a Second Memory Module
,
YOU CAN LEAVE IT IN PLACE UNLESS YOU WANT TO CHANGE SYSTEM
.
80 - Memory Upgrade Module
2
1
Retaining Clip
Alignment Key
T
ABLET

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents