Removing A Memory Upgrade Module - Fujitsu LifeBook S710 User Manual

2
Figure 22. Opening Memory Compartment
7
Insert the memory upgrade module at a 45° angle. Press the connector edge of the module firmly down and
into the connector until it lodges under the retaining clip. You'll hear a click when it is properly in place.
8
Replace the cover and reinstall the screws.
T
HE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR NOTEBOOK
O
NCE IT IS INSTALLED
CAPACITY

Removing a Memory Upgrade Module

1
Perform steps 1 through 4 of Installing a Memory Upgrade Module.
2
Pull the clips sideways away from each side of the memory upgrade module at the same time.
,
YOU CAN LEAVE IT IN PLACE UNLESS YOU WANT TO CHANGE SYSTEM MEMORY
.
77
2
1
Retaining Clip Alignment Key
Figure 23. Installing a 2nd Memory Module
.