Led Mode Select Button And Indicator Leds - HP J4865A Installation And Getting Started Manual

LED Mode Select Button and Indicator LEDs

To optimize the amount of information that can be displayed for each of the
switch ports, the Series 4100gl Switches use a Mode LED for each port. The
operation of this LED is controlled by the LED Mode Select button on the
switch chassis, and the current setting is indicated by the mode indicator LEDs
near the button. Press the button to change from one mode to the next.
LED Mode Select button
and indicator LEDs
If the Activity indicator LED is lit, each port Mode LED displays
activity information for the port—it flickers as network traffic is received
and transmitted through the port.
If the Full Duplex
those ports that are operating in full duplex.
If the maximum speed
for those ports that are operating at their maximum possible link speed.
Introducing the HP ProCurve Series 4100gl Switches
Mode LEDs
(one for each port)
indicator LED is lit, the port Mode LEDs light for
indicator LED is lit, the port Mode LEDs light
Front of the Switch
1-7