Switch Features - HP J4865A Installation And Getting Started Manual

Introducing the HP ProCurve Series 4100gl Switches

Switch Features

Switch Features
The features of the Series 4100gl Switches include:
1-10
4 or 8 slots for installing any of the available Switch gl Modules.
Supported Modules: As of this printing, the supported gl modules
includes:
• 24-port 10/100-TX gl Module (J4862A)
• 6-port 100/1000-T gl Module (J4863A)
• 3-port Gigabit Transceiver gl Module (J4864A) -- into which you can
install any of five different transceiver types including Gigabit-SX,
Gigabit-LX, 100/1000Base-T, Gigabit Stacking, and 100Base-FX
• 6-port mini-GBIC gl Module (J4893A) -- into which you can install the
supported mini-GBICs, the HP Gigabit-SX LC mini-GBIC (J4858A) and
the HP Gigabit-LX LC mini-GBIC (J4859A)
• 20-port Gig-T gl module with 2 mini-GBIC Gig ports (J4908A)
The Switch 4108gl Bundle has one Gigabit Transceiver gl Module and three
10/100-TX gl Modules preinstalled, and the Switch 4148gl has two 10/100-
TX gl Modules preinstalled.
the modules can be installed in any order and in any combination and can
be "hot swapped".
the supported HP ProCurve transceivers can be hot swapped into the
Gigabit Transceiver gl Module.
the supported mini-GBICs can be hot swapped into the mini-GBIC gl
Module.
high performance -- 36.6 Gbps switching fabric.
plug-and-play networking—all ports are enabled—just connect the
network cables to active network devices and your switched network is
operational.
automatic learning of the network addresses in the switch's 8000-address
forwarding table, with configurable address aging value.
full-duplex operation available on all ports.
Switch Features continued on the next page.