CE1 Network Processor Module LED Indicators
The three LEDs on the CE1 network processor module are labeled loopback, local alarm, and remote
alarm. (See Figure 4-16.)
Figure 4-16
The three LEDs on the CE1 front panel indicate the following:
•
•
•
Channelized E1 Network Interface Processor
DB-15
female
Local alarm—Indicates a loss of signal, a loss of frame, or unavailability because of excessive
errors.
Remote alarm—Indicates a remote alarm is received from the remote end because of a local
alarm at the remote end.
Loop—Indicates controller local loopback.
Reading Network Processor Module LED Indicators
cE1 / PRI
Troubleshooting the Initial Hardware Configuration 4-13