iRobot Roomba Combo j8 Enhanced Owner's Manual page 24

Troubleshooting your dock
Your AutoEmpty dock will tell you if something is wrong via an LED indicator on
the front of the canister and through the iRobot Home App. If the dock is not
performing as expected, check the iRobot Home app for errors.
LED indicator Common error
Bag
Solid red
full or missing
There is a
leak or a clog
Blinking red
in the dock
evacuation path
This product has been equipped with a thermal protector designed to protect
against damage due to overheating. If the protector operates, the motor will
stop running. If this happens, unplug the unit, allow it to cool for 30 minutes, clear
any obstructions from the evacuation port and evacuation tube, then plug the
unit back in.
How to fix
1. Replace bag if it is full or missing.
2. Make sure that the bag is
securely inserted.
3. If problem persists, remove any
debris from the port on the bottom
of your robot and dock.
1. Make sure that the canister lid is
pushed down and firmly sealed.
Hold the clean button on your robot
down for 2-5 seconds to manually
empty the bin.
2. Remove any debris from the port on
the bottom of your robot and dock.
3. Unplug the dock from the wall.
Place it on its side and inspect the
debris evacuation tube for debris. If
necessary, remove the tube to clear
any debris.
Roomba Combo® j8 Enhanced robot + AutoEmpty dock Owner's Guide
EN
23