iRobot Roomba Combo j8 Enhanced Owner's Manual page 14

2
Place on the floor and press the clean button on the robot.
Vacuuming and mopping
Your robot is able to both vacuum and mop at the same time when the Combo™
bin is installed.
IMPORTANT: Do not flip the robot over with the Combo Bin installed.
The product starts wicking as soon as water is put into the tank
After completing your mopping and vacuum cleaning job, make sure
to empty the robot bin water tank and replace the mopping pad.
Only certain cleaning solutions can be safely used with your robot.
A full list of compatible cleaning solutions can be found on http://
answers.irobot.com/s/roomba-combo-cleanser or by visiting
the app. Please do not use other cleaning solutions or bleach-
based products.
Starting a vacuum and mop cleaning job from your robot
1
Install the mopping pad. Slide the pad down over the track. Press the pad to
the plate to attach.
2
Fill the Combo™ bin with water. You may also use a compatible
cleaning solution.
3
Remove the Dust Bin from the robot, and install the Combo™bin.
NOTE: If you start a cleaning job from off the dock, the robot will still
end its job on the dock. If it can't find its dock, it will end wherever it
started in your home.
Roomba Combo® j8 Enhanced robot + AutoEmpty dock Owner's Guide
EN
13