Replacing the bag
1
Lift up on the canister lid to open.
2
Pull up on the card to remove the bag from the
canister. Discard the used bag.
3
Install a new bag, sliding the plastic card into
the guide rails. This will seal the bag so dust and
debris cannot escape.
4
Press down on the lid making sure that it is
completely closed.
IMPORTANT:
To achieve optimal
performance with your robot and dock,
clean and/or replace your robot's
filter as needed.
Removing Debris from Blower Cover
Inspect blower cover for any lint or debris build-up,
and wipe with a clean dry cloth to remove.
Roomba Combo® j8 Enhanced robot + AutoEmpty dock Owner's Guide
EN
21
Need help?
Do you have a question about the Roomba Combo j8 Enhanced and is the answer not in the manual?
Questions and answers