iRobot Roomba Combo j8 Enhanced Owner's Manual page 16

Care and maintenance for your robot
To keep your robot at optimal performance, make sure you periodically perform the following basic care &
maintenance. There are additional instructional videos in the iRobot Home App. If you notice the robot picking
up less debris from your floor, empty the bin, clean the filter, and clean the brushes.
Part Care Frequency
Bin Empty bin as needed
Clean once a week (twice a week if
Filter
you have a pet). Do not wash
Clean once a month (twice a month
Edge-sweeping brush
if you have a pet)
Front caster wheel Clean every 2 weeks or as needed
Clean once a month (twice a month
Multi-surface brush
if you have a pet)
Full bin sensor Clean every 2 weeks or as needed
Charging contacts Clean once a month or as needed
Sensors Clean once a month or as needed
Camera window
Clean and inspect once a month
Mopping pad Clean after a mopping job
Wick caps -
* Replacement frequency may vary. Parts should be replaced if visible wear appears. If you think you need a replacement part,
please contact iRobot Customer Care for more information.
Replacement Frequency*
-
Every 3-6 months
Every 3-6 months
-
Every 6-12 months
-
-
-
-
After 30 washes
Replace if dirty or shows wear
Roomba Combo® j8 Enhanced robot + AutoEmpty dock Owner's Guide
Washing the bin
1
Release the bin, remove the filter, and open
the bin door.
2
Rinse the dust bin and water tank using
warm water.
3
Make sure bin is completely dry. Reinsert filter
and place bin back in the robot.
IMPORTANT: The bin is not dishwasher
safe. Do not wash the filter. Remove the
filter before washing the bin.
EN
15