iRobot Roomba Combo j8 Enhanced Owner's Manual page 18

Cleaning the Multi-Surface Brushes
1
Pinch the brush frame release tab, lift the tab,
and remove any obstructions.
2
Remove the brushes from the robot. Remove the
brush caps from the ends of the brushes. Remove
any hair or debris that has collected beneath the
caps. Reinstall the brush caps.
3
Remove any hair or debris from the square
and hexagonal pegs on the opposite side of
the brushes.
4
Remove the bin from the robot and clear any
debris from the vacuum path.
5
Reinstall the brushes in the robot. Match the
shape of the brush pegs with the shape of the
brush icons in the cleaning head module.
Cleaning the Full Bin Sensors
1
Remove and empty the bin.
2
Wipe the inner sensors with a clean, dry cloth.
3
Wipe the bin door with a clean, dry cloth.
Closed Door
Open Door
Roomba Combo® j8 Enhanced robot + AutoEmpty dock Owner's Guide
EN
17