Cuckoo CP-SN102HW Replacement Manual

CP-SN102HW
FILTER CONFIGURATION & REPLACEMENT CYCLE
FILTER
➀ SEDIMENT 3.0 FILTER
(813SD)
➁ CARBON COMPOSITE FILTER
➂ NANO POSITIVE PLUS 3.0 FILTER
Please check the type and the number of the new filters before removing the old filters!
REPLACEMENT GUIDE
Close the source water supply
1
valve in the direction of the
arrow.
Lock
Remove the water tray and
2
detach the filter cover by
pulling the cover out towards
you.
Turn the filter lever
3
counterclockwise.
2 1 3
Detach the filter bracket and wait
4
until the melody stops.
2 1 3
Filter Replacement Guide
Please use the self-cleaning kit enclosed in the box to keep the product clean.
* Caution: Please use the clean swab carefully when cleaning the inside of faucet
SELF CLEANING KIT
셀프 클린키트
Water Purifier Air Purifier Electronic Bidet
정수기 공기청정기 비데
Filter Replacement Guide
Official Website CUCKOORENTAL.COM
Customer Service Center 888.700.0425 [Business Hours : M-F, 9AM-6PM(PST)]
P/N : 10384-0001E0 REV.0
LABEL
COLOR
YELLOW
GREEN
(801CC)
ORANGE
(813NP)
1. Clean wipes
Clean the interior/exterior
of the product
REPLACEMENT
CYCLE
4 months
4 months
8 months
ONLY USE GENUINE CUCKOO FILTERS
Lift the filter up then pull
5
downward to remove.
Remove the protective cap
off your new filter, then insert
3
Open
2
the new filter into the cavity.
To assemble the filter bracket,
6
turn the filter lever clockwise.
※ If the filter bracket is not correctly
Reassemble the filter cover
7
and the water tray.
Open the source water supply
8
valve in the direction of the
arrow.
Open
2. Gloves
Use when replacing
the filter
2 1 3
assembled, the source water will
not be supplied.
3. Cotton Swab
Use to clean the inside
of the faucet
SCAN ME