Safety Requirements; Power Connection - quadient IS-430 User Manual

1.2
1

Power Connection

Before connection, check whether the Franking Machine is suitable for the local AC
power voltage (230V - 50Hz).
• Use an outlet located near the system that is easily accessible.
• Do not route the power cord between pieces of furniture or over sharp edges.
• Avoid using outlets controlled by wall switches or shared by other equipment.
• Make sure the franking machine is close enough to the electric outlet that it leaves
plenty of slack on the power cable cord.
Compliance
Energy Star compliance
Your franking machine is Energy Star compliant: it helps you to save energy and money
while protecting the environment.
6

Safety Requirements

THIS SYSTEM MUST BE GROUNDED
• Only connect the power plug to an outlet provided with a
protective ground contact.
• To reduce the risk of fire, use only the power cord supplied
with the Franking Machine.
• Do not use ground adaptors.
• Do not use this product on a wet floor or near water.
• In case of liquid spillage, disconnect the power cord from
the outlet and proceed with cleaning.