Casio CLASSPAD MANAGER User Manual page 57

3.
Type in up to 39 characters of text, and then click [OK].
• This will display the text in a broken line frame at the location you input in step 2.
4.
Click and hold inside the broken line frame, and drag the text to the location you want.
5.
After you are fi nished locating the text where you want, click the G button or select a different
drawing tool.
• This will cause the frame to disappear and fi x the text at its current location.
Specifying the Figure Line Width and Fill Pattern
The procedures in this section explain how to specify the thickness and color (white or black) of
the lines and fi gure outlines you draw with the drawing tools, the fi ll pattern of closed fi gures, and
whether the area within a closed fi gure is translucent or opaque.
■ To specify the line thickness
1.
Click F.
• Each click of F cycles through the four available width settings (indicated by the value on the
right side of the button). The values indicate the line width in number of pixels.
2.
Perform the procedure under "Drawing Figures" on page E-52 to draw the fi gure you want.
• The fi gure will be drawn using the line thickness you specifi ed in step 1.
■ To toggle lines, outlines, and text color between black and white
1.
Click d (or e).
• Each time you click the button it toggles between d (black) and e (white).
2.
Perform the procedure under "Drawing Figures" on page E-52 to draw a fi gure or "To insert text
into a drawing" on page E-54 to input text.
• The text or fi gure will be the color you specifi ed in step 1.
20060301
E-55